[BioC] Sc03b_MR_v04 CDF package

James W. MacDonald jmacdon at med.umich.edu
Wed Aug 27 22:08:17 CEST 2008 

Hi Ludo,

Ludo Muller wrote:
> James, you are right about the erroneous bpmap files. I contacted
> Affymetrix about this problem and after looking into it, they confirmed
> that a lot of the mm probes have the same coordinates as the pm probes in
> the bpmap files. They are supposedly working to fix the problem, but
> couldn't give me an estimate of when they would have a corrected bpmap
> file.

Interesting. I didn't look into the problem any further than to see that 
at least one MM probe shares the same (x, y) coordinates (in the cdf) 
with another MM probe. Although by definition the PM probes would also 
be identical, in this case  they have their own coordinates.

So there are two really good (IMO) possibilities here. First, Affy just 
blundered here, and the bpmap files are wrong. Apparently whomever you 
talked to at Affy thinks this is the case.

Second, since there are supposed to be probes with on average 10 bases 
in between, I would have to imagine that there are a lot of probes that 
would be identical. I don't know if they just blithely tile down probes 
regardless of the fact that there are many replicated probes, or if they 
just put one down for each replicate and then point to that one probe 
for the duplicates in the bpmap file, or if they don't use the probes 
that aren't unique. It has been argued in offline communications that 
some permutation of the above is the case, and that we just need to 
change the code in pdInfoBuilder to account for that.

It has also been recommended that we contact a higher-up at Affy to get 
confirmation which I haven't yet done, but will do now.


> 
> Do you know if it is possible to extract just the pm hybridization
> intensity values from the cel files without a corrected bpmap file? I don't
> necessarily need the mm probe intensity values since there are alternative
> ways for background correction that don't rely on them.

Well, not within the pdInfoBuilder/oligo structure. If you just want to 
roll your own functions, then the affxparser package is your friend. It 
will quickly and easily get out just about any information you might 
want from just about any file type that Affy supplies, including the 
celfiles.

Best,

Jim


> 
> Thanks again,
> 
> Ludo.
> 
> ---
> Ludo A.H. Muller, Ph.D.
> Dept. of Molecular Genetics & Microbiology
> Box 3020, Duke University Medical Center
> Durham, NC 27710, USA
> 
> Phone: +1 (919) 681-6781 or 681-6778
> Fax: +1 (919) 684-8735
> E-mail: ludo.muller at duke.edu
> Homepage: http://www.duke.edu/~mulle019
> 
> -----"James W. MacDonald" <jmacdon at med.umich.edu> wrote: -----
> 
> To: Ludo Muller <ludo.muller at duke.edu>
> From: "James W. MacDonald" <jmacdon at med.umich.edu>
> Date: 08/22/2008 08:00AM
> cc: bioconductor at stat.math.ethz.ch
> Subject: Re: [BioC] Sc03b_MR_v04 CDF package
> 
> So I tracked this down, and it _doesn't_ appear to be a bug in
> pdInfoBuilder. It appears to be either an error or an inconsistency in
> the Affy bpmap files. I didn't use the yeast chip, as I am not sure I
> can get the one you used but I get the same error with the Arabidopsis
> bpmap so I used that one.
> 
> It all boils down to this:
> 
>  > library(affxparser)
>  > tmp <- readBpmap("At35b_MF_v04-2_TIGRv5.bpmap", 26)
>  > head(do.call("cbind",tmp[[1]][2:5]), n=20)
>         pmx  pmy  mmx  mmy
>   [1,] 2197 2194 2198 2194
>   [2,] 2379  997 2380  997
>   [3,] 2443 1111 2444 1111
>   [4,] 2485  826 2486  826
>   [5,] 2491 2374 2492 2374
>   [6,] 2497  826 2498  826
>   [7,] 2503 1602 2504 1602
>   [8,] 2505 1129 2506 1129
>   [9,] 2507 2022 2508 2022
> [10,] 1687  169 1688  169
> [11,] 1687  501 1688  501
> [12,] 1687  638 1688  638
> [13,] 1687  871 1688  871
> [14,] 1687  873 1688  873
> [15,] 1687 1007 1688 1007
> [16,] 1687 1371 1688 1371
> [17,] 1687 1492 1688 1492
> [18,] 1687 2346 1688 2346 <-
> [19,] 1687 2347 1688 2346 <-
> [20,] 1689  287 1690  287
> 
> As you can see, for this QC probeset there are two MM probes that appear
> to be right on top of each other. I assume the second should really have
> an (1688, 2347) coordinate, but the bpmap is in error. Since this will
> make two identical indices which are used as the primary key for the
> table these data are being fed into we get an error as the primary key
> must be unique.
> 
> For the A. thaliana chip there are 36 such errors in the bpmap file for
> just the QC probes.
> 
> Best,
> 
> Jim
> 
> 
> 
> Ludo Muller wrote:
>> Hi James,
>>
>> Thank you for your help. I installed the pdInfoBuilder package locally,
> on
>> my Win XP computer (I also requested it to be installed on a Linux
> server,
>> in case my computer doesn't have enough memory), and I ran the following
> (I
>> downloaded the appropriate .bpmap and .cif files):
>>
>>> pkg <- new("AffyTilingPDInfoPkgSeed",version="0.0.1",author="Ludo
>> Muller",email="ludo.muller
>> at ...",biocViews="AnnotationData",genomebuild="Stanford Yeast Genome
>> Database, October
>> 2003",bpmapFile="Sc03b_MR_v04.bpmap",cifFile="Sc03b_MR_v04.cif")
>>> makePdInfoPackage(pkg,destDir=".")
>> However, I get the following message:
>>
>> Creating package in ./pd.sc03b.mr.v04
>> Error in sqliteExecStatement(conn, statement, bind.data, ...) :
>>   RS-DBI driver: (RS_SQLite_exec: could not execute: PRIMARY KEY must be
>> unique)
>> Timing stopped at: 6.35 0.17 6.59
>>
>> I found an earlier report dealing with a similar error message:
>> https://stat.ethz.ch/pipermail/bioconductor/2008-June/023080.html
>>
>> Is it likely that the information files for this array are also
> inaccurate?
>> Cheers,
>>
>> Ludo.
>>
>> ---
>> Ludo A.H. Muller, Ph.D.
>> Dept. of Molecular Genetics & Microbiology
>> Box 3020, Duke University Medical Center
>> Durham, NC 27710, USA
>>
>> Phone: +1 (919) 681-6781 or 681-6778
>> Fax: +1 (919) 684-8735
>> E-mail: ludo.muller at duke.edu
>> Homepage: http://www.duke.edu/~mulle019
>>
>>
>>
>> -----"James W. MacDonald" <jmacdon at med.umich.edu> wrote: -----
>>
>>
>> To: Ludo Muller <ludo.muller at duke.edu>
>> From: "James W. MacDonald" <jmacdon at med.umich.edu>
>> Date: 08/19/2008 09:05AM
>> cc: bioconductor at stat.math.ethz.ch
>> Subject: Re: [BioC] Sc03b_MR_v04 CDF package
>>
>> Hi Ludo,
>>
>> Ludo Muller wrote:
>>> Hi all,
>>>
>>> I have data from hybridizations onto the Affymetrix yeast tiling array
>>> (Sc03b_MR_v04) which I would like to analyze using Bioconductor. However
>>> the CDF package (sc03bmrv04cdf) for this array doesn't seem to be
>> available
>>> from the bioconductor website. Can anybody tell me if it is available
>>> elsewhere or whom I could contact about creating this package?
>> There will probably never be such a beast, as that implies the usage of
>> the affy package. Instead, you should be using the oligo package and
>> pdInfoBuilder. For that you will need the CIF and BPMAP files from Affy,
>> and something like
>>
>> pkg <- new("AffyTilingPDInfoPkgSeed", version = "0.0.1", author = "You",
>> email = "you at yours.com", biocViews = "AnnotationData", genomebuild =
>> "thegenomebuild", bpmapFile = <name of bpmap file>, cifFile = <name of
>> cif file>)
>>
>> makePdInfoPackage(pkg)
>>
>> And then install using R CMD INSTALL <the package name>. You don't
>> mention your OS, so that might simply entail running the above at a
>> terminal prompt (if on Linux), or if you are on Windows or MacOS, you
>> will need to get set up to build packages. See the R FAQ for either OS
>> for further info about that.
>>
>> Best,
>>
>> Jim
>>
>>
>>> Cheers,
>>>
>>> Ludo.
>>>
>>> ---
>>> Ludo A.H. Muller, Ph.D.
>>> Dept. of Molecular Genetics & Microbiology
>>> Box 3020, Duke University Medical Center
>>> Durham, NC 27710, USA
>>>
>>> Phone: +1 (919) 681-6781 or 681-6778
>>> Fax: +1 (919) 684-8735
>>> E-mail: ludo.muller at duke.edu
>>> Homepage: http://www.duke.edu/~mulle019
>>>
>>> _______________________________________________
>>> Bioconductor mailing list
>>> Bioconductor at stat.math.ethz.ch
>>> https://stat.ethz.ch/mailman/listinfo/bioconductor
>>> Search the archives:
>> http://news.gmane.org/gmane.science.biology.informatics.conductor
>>
>> --
>> James W. MacDonald, M.S.
>> Biostatistician
>> Hildebrandt Lab
>> 8220D MSRB III
>> 1150 W. Medical Center Drive
>> Ann Arbor MI 48109-0646
>> 734-936-8662
>>
>> _______________________________________________
>> Bioconductor mailing list
>> Bioconductor at stat.math.ethz.ch
>> https://stat.ethz.ch/mailman/listinfo/bioconductor
>> Search the archives:
> http://news.gmane.org/gmane.science.biology.informatics.conductor
> 
> --
> James W. MacDonald, M.S.
> Biostatistician
> Hildebrandt Lab
> 8220D MSRB III
> 1150 W. Medical Center Drive
> Ann Arbor MI 48109-0646
> 734-936-8662
> 
> 

-- 
James W. MacDonald, M.S.
Biostatistician
Hildebrandt Lab
8220D MSRB III
1150 W. Medical Center Drive
Ann Arbor MI 48109-0646
734-936-8662

More information about the Bioconductor mailing list