[R] pdf font embedding --- again
ivo_welch-rstat8303@mailblocks.com
ivo_welch-rstat8303 at mailblocks.com
Tue Aug 30 01:40:25 CEST 2005
Dear Paul:
Thank you for responding. I had thought I had imposed too much, and
did not want to be a bother any more. In any case, this does not seem
to work for me.
> afmfiles <- c("lbr.afm", "lbd.afm", "lbi.afm", "lbdi.afm", "lbms.afm")
> postscriptFonts(lucida=postscriptFont("Lucida", metrics=afmfiles))
> postscriptFonts();
# snipped a lot of fonts
$lucida
$lucida$family
[1] "Lucida"
$lucida$metrics
[1] "lbr.afm" "lbd.afm" "lbi.afm" "lbdi.afm" "lbms.afm"
$lucida$encoding
[1] "default"
> > postscript(file="test.ps", fonts="Lucida");
Error in postscript(file = "test.ps", fonts = "Lucida") :
Failed to initialise additional PostScript fonts
In addition: Warning message:
Font encoding not found in PostScript font database
>
to make sure I have all the files accessible, I symbolically linked
them into the current directory, too:
$ file *
lbd.afm: symbolic link to
`/usr/share/texmf/fonts/afm/yandy/lubright/lbd.afm'
lbd.pfb: symbolic link to
`/usr/local/share/texmf/fonts/type1/yandy/lbd.pfb'
lbdi.afm: symbolic link to
`/usr/share/texmf/fonts/afm/yandy/lubright/lbdi.afm'
lbdi.pfb: symbolic link to
`/usr/local/share/texmf/fonts/type1/yandy/lbdi.pfb'
lbi.afm: symbolic link to
`/usr/share/texmf/fonts/afm/yandy/lubright/lbi.afm'
lbi.pfb: symbolic link to
`/usr/local/share/texmf/fonts/type1/yandy/lbi.pfb'
lbms.afm: symbolic link to
`/usr/share/texmf/fonts/afm/yandy/lumath/lbms.afm'
lbms.pfb: symbolic link to
`/usr/local/share/texmf/fonts/type1/yandy/lbms.pfb'
lbr.afm: symbolic link to
`/usr/share/texmf/fonts/afm/yandy/lubright/lbr.afm'
lbr.pfb: symbolic link to
`/usr/local/share/texmf/fonts/type1/yandy/lbr.pfb'
the links are live, and the files are what they pretend to be. any
more suggestions would be very highly appreciated.
sincerely,
/iaw
---
ivo welch
-----Original Message-----
From: Paul Murrell <p.murrell at auckland.ac.nz>
To: Paul Murrell <paul at stat.auckland.ac.nz>
Cc: ivo_welch-rstat8303 at mailblocks.com; ripley at stats.ox.ac.uk;
r-help at stat.math.ethz.ch
Sent: Tue, 30 Aug 2005 10:04:11 +1200
Subject: Re: [R] pdf font embedding --- again
Hi
Paul Murrell wrote:
> Hi
> > I think there are two problems:
> > (i) You are specifying the font incorrectly. Try ...
> > # You might need to specify full paths to these
> afmfiles <- c("lbr.afm", "lbd.afm", "lbi.afm", "lbdi.afm",
"lbms.afm");
> # Set up the mapping for "lucida" font family
> postscriptFonts(lucida=postscriptFont("Lucida", metrics=afmfiles))
> # Specify that the "lucida" font is to be used
> postscript(file="test.ps", family="lucida");
Thanks to Brian Ripley for pointing out that that should be ...
postscript(file="test.ps", fonts="lucida");
> l<- 40:80;
> plot(l,l,pch=l);
> dev.off();
> > Should work for pdf() too.
> > This should put a reference to the appropriate font in the
PostScript or > PDF file that R creates.
> > (ii) R does not embed font information. But you can, for example,
use > ghostscript to do it, as long as you tell ghostscript about the
font > too. You might have to set up a file 'FontMap' which looks
something > like ...
> > /Lucida (PATH_TO/lb___.pfb);
> > ... (assuming that lb___.pfb is the name of the .pfb file for the
Lucida > font). Then try something like (NOTE that you have to specify
> GS_FONTPATH to tell ghostscript where your FontMap file is) ...
> > GS_FONTPATH=PATH_TO_FontMap gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite
> -sPAPERSIZE=a4 -sOutputFile=testembed.pdf test.pdf
> > This should give you a file with the font info embedded and then
you > should be able to include that in a LaTeX document.
> > Paul
> > p.s. Thanks for the segfault report. I will look at why that is
happening.
> > > ivo_welch-rstat8303 at mailblocks.com wrote:
> >> Thank you---as always.
>>
>> still, I remain font-desparate.
>>
>> I would love to use the fonts from my book, but [a] I cannot figure
>> out how to do this yet even in the R postscript device; and [b] I am
>> using the R pdf device, not the postscript device. I guess if I can
>> solve [a], then I can rewrite all my graphics creations now into the
>> postscript device, and replace the dev.off() with something that >>
follows it with ps2pdf. The following attempt, however, does not work:
>>
>> afmfiles <- c("lbr.afm", "lbd.afm", "lbi.afm", "lbdi.afm", >>
"lbms.afm");
>> Lucida <- postscriptFont("Lucida", metrics=afmfiles);
>> postscript(file="test.ps", family=Lucida);
>> l<- 40:80;
>> plot(l,l,pch=l);
>> dev.off();
>>
>> By the way, if I try " postscript(family=afmfiles);" then I do not
>> get an R error, but R 2.1.0 segfaults, which is probably not >>
desirable. This occurs even if there is no .afm file in the current >>
directory.
>>
>>
>> Can I make a suggestion to the R team? It would be nice if I could
>> specify a pdf() device parameter that says "choose font settings to
>> embed all fonts" (i.e., do not use fonts that cannot be embedded, >>
either). Something that guarantees me that I get a figure that I can >>
give to someone that is fully specified. Right now, accomplishing >>
this is not easy to figure out, and perhaps not even possible. Yes, >>
in the list of font families that R recognizes are some fonts that do
>> not seem among the 13 standard fonts (such as URWbookman). moreover,
>> if I choose it as my pdf font family, it is smart enough to use a >>
different symbol file ('StandardSymL'), which I hope is also open and
>> not adobe. If so, they could be used in principle. How do I get R to
>> embed URWbookman? ZapfDingbats always seems to be included, so I
hope >> this is open and embeddable.
>>
>> more help would be highly appreciated.
>>
>> Regards,
>>
>> /iaw
>> ---
>> ivo welch
>>
>> -----Original Message-----
>> From: Prof Brian Ripley <ripley at stats.ox.ac.uk>
>> To: ivo_welch-rstat8303 at mailblocks.com
>> Cc: r-help at stat.math.ethz.ch
>> Sent: Mon, 22 Aug 2005 17:07:14 +0100 (BST)
>> Subject: Re: [R] pdf font embedding --- again
>>
>> On Mon, 22 Aug 2005 ivo_welch-rstat8303 at mailblocks.com wrote:
>>
>> >
>> > dear R wizards--- I would like to do some book-on-demand printing
>> at a
>> > popular printer named lulu, but lulu requires inclusion even of
the
>> > basic postscript fonts. Interestingly, my book itself does not
need
>> > the 14 base acrobat fonts, only the embedded R figures do. Of
course,
>> > I really would like to get pdftex to embed the fonts, but how to
do
>> > this is not obvious either. [This method seems to be what the R
help
>> > page is indicating... The software including the PostScript plot
file
>> > should either embed the font outlines (usually from '.pfb' or
'.pfa'
>> > files) or use DSC comments to instruct the print spooler to do
so.)
>>
>> Why not use the fonts your book does use in the figures? (That's
how
>> my books are done.)
>>
>> > So, I would really, really like to embed the necessary fonts with
>> the R
>> > figures. I first reread the discussion in this mailing list about
>> > (eps) font embedding earlier this year. This was ultimately not
very
>> > helpful. First, I do not know how to instruct my embedding
program to
>> > include the fonts that R figures want. Second, I already start
with
>> > the pdf device, so distilling eps files is not a good option--and
it
>> > would seem a bit crazy to first use the wrong output device
>> > (postscript), then ship my files over to a windows machine
somewhere
>> > that has distiller installed, run distiller by hand, then ftp
them >> back
>> > to my linux machine---just for getting the fonts embedded.
>> >
>> > Is it impossible to get R to embed the necessary fonts in its pdf
>> > output?
>>
>> Yes, as it has no access to them. They are not Open Source. You may
>> be able to use URW clones, depending on their licensing conditions.
>>
>> -- Brian D. Ripley, ripley at stats.ox.ac.uk
>> Professor of Applied Statistics, http://www.stats.ox.ac.uk/~ripley/
>> University of Oxford, Tel: +44 1865 272861 (self)
>> 1 South Parks Road, +44 1865 272866 (PA)
>> Oxford OX1 3TG, UK Fax: +44 1865 272595
>>
>> ______________________________________________
>> R-help at stat.math.ethz.ch mailing list
>> https://stat.ethz.ch/mailman/listinfo/r-help
>> PLEASE do read the posting guide! >>
http://www.R-project.org/posting-guide.html
> > >
-- Dr Paul Murrell
Department of Statistics
The University of Auckland
Private Bag 92019
Auckland
New Zealand
64 9 3737599 x85392
paul at stat.auckland.ac.nz
http://www.stat.auckland.ac.nz/~paul/
More information about the R-help
mailing list