[R] Means do not tally

jim holtman jholtman at gmail.com
Mon May 24 19:50:00 CEST 2010


Notice that only column 19 in your original had the same for the
average of the average and every entry had 32 data points.

On Mon, May 24, 2010 at 1:47 PM, jim holtman <jholtman at gmail.com> wrote:
> A quick check of you data shows that there are not the same number of
> sample in each of the different conditions, therefore trying to take
> the average of the averages will not work.
>
>      1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
>  1  32 31 29 30 24 23 31 32 32 31 24 23 29 24 30 26 20 17 32 32 32 31 24 23
>  2  32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 31 24 24
>  3  32 32 32 32 24 23 32 32 32 31 24 23 32 32 32 31 24 24 32 31 32 32 24 24
>  4  31 29 31 29 22 21 31 28 31 29 24 23 29 29 30 26 22 24 32 31 31 30 20 24
>  5  31 32 32 32 24 24 32 31 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24
>  6  32 31 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 23 24
>  7  32 31 32 31 24 24 32 32 32 32 24 24 32 32 32 32 23 24 32 32 32 32 24 24
>  11 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24
>  12 32 32 32 32 24 24 32 32 31 32 24 24 31 32 32 32 23 23 32 32 32 32 24 24
>  13 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24
>  14 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24
>  15 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24
>  16 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 31 23 23 32 32 32 31 24 24
>  17 32 32 32 31 24 24 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24
>  18 32 32 32 32 24 24 32 32 32 32 23 24 32 32 32 32 24 24 32 32 32 32 24 24
>  19 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24
>  20 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24
>  21 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24 32 32 32 32 24 24
>  22 32 32 32 32 24 24 32 32 31 32 24 24 32 31 32 32 24 24 32 32 32 32 24 24
>  23 32 32 32 32 24 24 32 32 32 31 24 23 32 32 32 31 24 24 32 32 32 32 24 24
>
>
> On Mon, May 24, 2010 at 1:29 PM, Ruijie <breakaway8 at gmail.com> wrote:
>> Thanks for your help jim. I have attached the raw data to see if anyone else
>> can replicate my problem.
>>
>> Correction: i realise my attachment was too large, I have uploaded it to
>> another site. The link is:
>> http://dl.dropbox.com/u/1443460/List%20-%20Raw%20Data.csv
>>
>>
>> Regards,
>> Ruijie (RJ)
>>
>> --------
>> He who has a why can endure any how.
>>
>> ~ Friedrich Nietzsche
>>
>>>
>>>
>>> On 25 May 2010 00:17, jim holtman <jholtman at gmail.com> wrote:
>>>
>>>> Are you sure that you have the same number of data points in each of
>>>> the summary cells that you show in your csv file that was sent?  You
>>>> need to provide a reproducible example of all the data so we can see
>>>> what you did.  The best information I can provide at this point is
>>>> that you have a "bug" in your calculations.
>>>>
>>>> On Mon, May 24, 2010 at 11:10 AM, Ruijie <breakaway8 at gmail.com> wrote:
>>>> > Noted.
>>>> >
>>>> > I have attached a list of some data in csv format.
>>>> >
>>>> > The first column is the SubID and the rest of the column are the mean of
>>>> > each condition for the particular subject.
>>>> >
>>>> > Average 1 is the average computed from each column in the list.
>>>> > Average 2 is computed from the raw data of all the data points of a
>>>> > condition.
>>>> >
>>>> > The difference is typically at the 3rd decimal place. If anyone needs
>>>> the
>>>> > raw data, I could supply it after some clean up.
>>>> >
>>>> > I suspected round of errors but in all procedures in R, I retained 14
>>>> > significant figures. How would the round off error affect the 3rd
>>>> decimal
>>>> > place?
>>>> >
>>>> > Any ideas anyone?
>>>> >
>>>> > Regards,
>>>> > Ruijie (RJ)
>>>> >
>>>> > --------
>>>> > He who has a why can endure any how.
>>>> >
>>>> > ~ Friedrich Nietzsche
>>>> >
>>>> >
>>>> > On 24 May 2010 22:47, jim holtman <jholtman at gmail.com> wrote:
>>>> >>
>>>> >> It is hard to tell what you are doing without data and the results you
>>>> >> have gotten so far:
>>>> >>
>>>> >> PLEASE do read the posting guide
>>>> >> http://www.R-project.org/posting-guide.html
>>>> >> and provide commented, minimal, self-contained, reproducible code.
>>>> >>
>>>> >>
>>>> >> On Mon, May 24, 2010 at 10:35 AM, Ruijie <breakaway8 at gmail.com> wrote:
>>>> >> > Hi all,
>>>> >> >
>>>> >> > here is my situation
>>>> >> >
>>>> >> > In my experiment, I expose 10 subjects to 24 different conditions of
>>>> >> > stimuli. Each condition is exposed to the same subject 3x.
>>>> >> > This would make each subject have 24x3=72 data points. All the
>>>> subjects
>>>> >> > combined would have 72x10=720 data points with each condition having
>>>> 30
>>>> >> > datapoints.
>>>> >> >
>>>> >> > To find the grand average of each condition, I find the average of
>>>> all
>>>> >> > the
>>>> >> > datapoints for a given condition.
>>>> >> >
>>>> >> > To find the SD for each condition, if I use the raw dataset (720
>>>> >> > datapoints)
>>>> >> > it would not reflect the SD across subjects. Therefore, I compute the
>>>> >> > average for each condition per subject .i.e. For subject 1, I would
>>>> find
>>>> >> > the
>>>> >> > average of condition 1 (average across 3 trials). and so on.
>>>> >> > With the average of each condition per subject, I then compute the
>>>> SD.
>>>> >> >
>>>> >> > Since I computed the average of each condition per subject,
>>>> >> > theoretically,
>>>> >> > if i average the average of each condition per subject across all
>>>> >> > subjects,
>>>> >> > the result would be the same as the grand average.
>>>> >> >
>>>> >> > However, this is not the case when I use R or Excel. regardless of
>>>> >> > functions
>>>> >> > used. Anyone have any thoughts?
>>>> >> >
>>>> >> > Regards,
>>>> >> > Ruijie (RJ)
>>>> >> >
>>>> >> > --------
>>>> >> > He who has a why can endure any how.
>>>> >> >
>>>> >> > ~ Friedrich Nietzsche
>>>> >> >
>>>> >> >        [[alternative HTML version deleted]]
>>>> >> >
>>>> >> > ______________________________________________
>>>> >> > R-help at r-project.org mailing list
>>>> >> > https://stat.ethz.ch/mailman/listinfo/r-help
>>>> >> > PLEASE do read the posting guide
>>>> >> > http://www.R-project.org/posting-guide.html
>>>> >> > and provide commented, minimal, self-contained, reproducible code.
>>>> >> >
>>>> >>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> Jim Holtman
>>>> >> Cincinnati, OH
>>>> >> +1 513 646 9390
>>>> >>
>>>> >> What is the problem that you are trying to solve?
>>>> >
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> Jim Holtman
>>>> Cincinnati, OH
>>>> +1 513 646 9390
>>>>
>>>> What is the problem that you are trying to solve?
>>>>
>>>
>>>
>>
>>        [[alternative HTML version deleted]]
>>
>> ______________________________________________
>> R-help at r-project.org mailing list
>> https://stat.ethz.ch/mailman/listinfo/r-help
>> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
>> and provide commented, minimal, self-contained, reproducible code.
>>
>
>
>
> --
> Jim Holtman
> Cincinnati, OH
> +1 513 646 9390
>
> What is the problem that you are trying to solve?
>



-- 
Jim Holtman
Cincinnati, OH
+1 513 646 9390

What is the problem that you are trying to solve?



More information about the R-help mailing list