[R] Exporting summary plm results to latex
Duncan Mackay
mackay at northnet.com.au
Thu Oct 11 08:45:32 CEST 2012
Hi Sebastian
I think I found the package by accident when I did a search of the
Cran package page for"latex" but did not use it as it could not do a
very particular problem.
If there was no other alternative use the add.to.row argument of xtable
A while ago I needed to add some info from the summary of a glm an I
think I did it by using the add.to.row argument and
"\multicolumn{n}{l}{text} & " value
where n is the number of columns for the text and the value is the
summary subscript object.
Be careful of "\" which has to be "\\" and carriage returns
I know its a bit kludgy but if I was doing more of them I would make
a template for my text editor which cuts down the work.
Regards
Duncan
At 09:45 11/10/2012, you wrote:
>I am also interested in the standard errors, but beneath not next to
>the point estimates which is standard in the xtable package.
>If you by any chance remember the name of the package or how to do
>it that would be much appreciated!
>
>Cheers,
>Sebastian
>
>
>On Oct 10, 2012, at 7:10 PM, Duncan Mackay <mackay at northnet.com.au> wrote:
>
> > Hi
> >
> > If you just want the coefficients.
> >
> > xtable(summary(fe)$coef)
> > % latex table generated in R 2.15.1 by xtable 1.7-0 package
> > % Thu Oct 11 09:04:59 2012
> > \begin{table}[ht]
> > \begin{center}
> > \begin{tabular}{rrrrr}
> > \hline
> > & Estimate & Std. Error & t-value & Pr($>$$|$t$|$) \\
> > \hline
> > x & 0.12 & 0.07 & 1.78 & 0.08 \\
> > \hline
> > \end{tabular}
> > \end{center}
> > \end{table}
> >
> > There is another package whose name eludes me which may help for
> tables which have different outputs to the output of lm etc
> >
> > HTH
> >
> > Duncan
> >
> > Duncan Mackay
> > Department of Agronomy and Soil Science
> > University of New England
> > Armidale NSW 2351
> > Email: home: mackay at northnet.com.au
> >
> >
> >
> > At 05:09 11/10/2012, you wrote:
> >> HI,
> >>
> >> May be you can use library(texreg):
> >>
> >> library(plm)
> >>
> >> #generating some data
> >> x <- rnorm(270)
> >> y <- rnorm(270)
> >> t <- rep(1:3,30)
> >> i <- rep(1:90, each=3)
> >>
> >> data <- data.frame(i,t,x,y)
> >>
> >> fe <- plm(y~x,data=data,model="within")
> >> summary(fe)
> >> library(texreg)
> >> fe1<-extract.plm(fe) #extract the plm object
> >>
> >> library(xtable)
> >>
> >> xtable(do.call(rbind,lapply(fe1,function(x) data.frame(x))))
> >> % latex table generated in R 2.15.0 by xtable 1.7-0 package
> >> % Wed Oct 10 14:59:10 2012
> >> \begin{table}[ht]
> >> \begin{center}
> >> \begin{tabular}{rr}
> >> \hline
> >> & x \\
> >> \hline
> >> Estimate & -0.03 \\
> >> Std. Error & 0.08 \\
> >> Pr($>$$|$t$|$) & 0.68 \\
> >> R\$\verb|^|2\$ & 0.00 \\
> >> Adj. R\$\verb|^|2\$ & 0.00 \\
> >> Num. obs. & 270.00 \\
> >> \hline
> >> \end{tabular}
> >> \end{center}
> >> \end{table}
> >> #Another example. In this case, you can create two tables from
> the zz1 list
> >> data("Produc", package = "plm")
> >> zz <- plm(log(gsp) ~ log(pcap) + log(pc) + log(emp) + unemp,
> data = Produc, index = c("state","year"))
> >> zz1<-extract.plm(zz)
> >>
> >>
> >> lapply(lapply(zz1,function(x) data.frame(x)),xtable)
> >> [[1]]
> >> % latex table generated in R 2.15.0 by xtable 1.7-0 package
> >> % Wed Oct 10 15:08:02 2012
> >> \begin{table}[ht]
> >> \begin{center}
> >> \begin{tabular}{rrrr}
> >> \hline
> >> & Estimate & Std..Error & Pr...t.. \\
> >> \hline
> >> log(pcap) & -0.03 & 0.03 & 0.37 \\
> >> log(pc) & 0.29 & 0.03 & 0.00 \\
> >> log(emp) & 0.77 & 0.03 & 0.00 \\
> >> unemp & -0.01 & 0.00 & 0.00 \\
> >> \hline
> >> \end{tabular}
> >> \end{center}
> >> \end{table}
> >>
> >> [[2]]
> >> % latex table generated in R 2.15.0 by xtable 1.7-0 package
> >> % Wed Oct 10 15:08:02 2012
> >> \begin{table}[ht]
> >> \begin{center}
> >> \begin{tabular}{rr}
> >> \hline
> >> & x \\
> >> \hline
> >> R\$\verb|^|2\$ & 0.94 \\
> >> Adj. R\$\verb|^|2\$ & 0.88 \\
> >> Num. obs. & 816.00 \\
> >> \hline
> >> \end{tabular}
> >> \end{center}
> >> \end{table}
> >>
> >>
> >> Hope it helps.
> >>
> >> A.K.
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> ----- Original Message -----
> >> From: Sebastian Barfort <sb3730 at nyu.edu>
> >> To: r-help at r-project.org
> >> Cc:
> >> Sent: Wednesday, October 10, 2012 1:07 PM
> >> Subject: [R] Exporting summary plm results to latex
> >>
> >> Dear all,
> >>
> >> I am trying to export my fixed effect results to Latex. I am
> using the plm package with the summary function. However, it does
> not look like apsrtable, stargazer, or any other package can
> accompany using the plm package.
> >>
> >> I am interested in a classic table with the coefficient in one
> row followed by the standard error in paranthesis in the next row
> and stars by the coefficient to show relevant coefficient level.
> >>
> >> coefficient 1 xxx**
> >> (xxx)
> >>
> >> Here is a reproducible example:
> >>
> >> library(plm)
> >>
> >> #generating some data
> >> x <- rnorm(270)
> >> y <- rnorm(270)
> >> t <- rep(1:3,30)
> >> i <- rep(1:90, each=3)
> >>
> >> data <- data.frame(i,t,x,y)
> >>
> >> fe <- plm(y~x,data=data,model="within")
> >> summary(fe)
> >>
> >> If there is an alternative to using the plm package that works
> with any of the export to latex packages, I would be very
> interested to know. Otherwise, any ideas of how to solve this
> problem are very welcome. I almost exclusively use fixed effect
> panel models, and the problem of exporting results to Latex is one
> of the things preventing me from switching entirely from Stata to R.
> >>
> >>
> >> Kind regards,
> >> Sebastian
> >>
> >>
> >> [[alternative HTML version deleted]]
> >>
> >> ______________________________________________
> >> R-help at r-project.org mailing list
> >> https://stat.ethz.ch/mailman/listinfo/r-help
> >> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> >> and provide commented, minimal, self-contained, reproducible code.
> >>
> >>
> >> ______________________________________________
> >> R-help at r-project.org mailing list
> >> https://stat.ethz.ch/mailman/listinfo/r-help
> >> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> >> and provide commented, minimal, self-contained, reproducible code.
> >
> > ______________________________________________
> > R-help at r-project.org mailing list
> > https://stat.ethz.ch/mailman/listinfo/r-help
> > PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> > and provide commented, minimal, self-contained, reproducible code.
More information about the R-help
mailing list