[R] nlminb supplying NaN parameters to objective function

William Dunlap wdunlap at tibco.com
Thu May 7 23:06:10 CEST 2015


Your nLL function returns 1e+308 in near-boundary cases.  Since 1e+308 is so
close to machine infinity, it is easy to get into Inf-Inf (=NaN) or Inf/Inf
(=NaN)
situations when working with it.  Try making that limiting value something
smaller,
like 1e+30, and you may have better luck.

Bill Dunlap
TIBCO Software
wdunlap tibco.com

On Thu, May 7, 2015 at 1:14 PM, Jean Marchal <jean.d.marchal at gmail.com>
wrote:

> A follow-up to my yesterday's email.
>
> I was able to make a reproducible example. All you will have to do is
> load the .RData file that you can download here:
>
> https://drive.google.com/file/d/0B0DKwRjF11x4dG1uRWhwb1pfQ2s/view?usp=sharing
>
> and run this line of code:
>
> nlminb(start=sv, objective = nLL, lower = 0, upper = Inf,
> control=list(trace=TRUE))
>
> which output the following:
>
>   0:     12523.401: 0.0328502 0.0744493 0.00205298 0.0248628 0.0881807
> 0.0148887 0.0244485 0.0385922 0.0714495 0.0161784 0.0617551 0.0244901
> 0.0784038
>   1:     12421.888: 0.0282245 0.0697934  0.00000 0.0199076 0.0833634
> 0.0101135 0.0189494 0.0336236 0.0712130 0.0160687 0.0616015 0.0244689
> 0.0660129
>   2:     12050.535: 0.00371847 0.0451786  0.00000  0.00000 0.0575667
> 0.00000  0.00000 0.00697067 0.0697205 0.0156250 0.0608550 0.0243431
> 0.0994355
>   3:     12037.682: 0.00303460 0.0445012  0.00000  0.00000 0.0568530
> 0.00000  0.00000 0.00636016 0.0696959 0.0156250 0.0608550 0.0243419
> 0.0988824
>   4:     12012.684: 0.00164710 0.0431313  0.00000  0.00000 0.0554032
> 0.00000  0.00000 0.00515500 0.0696451 0.0156250 0.0608550 0.0243395
> 0.0978328
>   5:     12003.017: 0.00107848 0.0425739  0.00000  0.00000 0.0548073
> 0.00000  0.00000 0.00469592 0.0696233 0.0156250 0.0608550 0.0243386
> 0.0974616
>   6:     11984.372:  0.00000 0.0414397  0.00000  0.00000 0.0535899
> 0.00000  0.00000 0.00378996 0.0695782 0.0156250 0.0608550 0.0243370
> 0.0967449
>   7:     11978.154:  0.00000 0.0409106  0.00000  0.00000 0.0530158
> 0.00000  0.00000 0.00340746 0.0695560 0.0156250 0.0608550 0.0243363
> 0.0964537
>   8:    -0.0000000:  0.00000      nan  0.00000  0.00000      nan
> 0.00000  0.00000      nan      nan      nan      nan      nan      nan
>
> Regards,
>
> Jean
>
> 2015-05-06 17:43 GMT-07:00 Jean Marchal <jean.d.marchal at gmail.com>:
> > Dear list,
> >
> > I am doing some maximum likelihood estimation using nlminb() with
> > box-constraints to ensure that all parameters are positive. However,
> > nlminb() is behaving strangely and seems to supply NaN as parameters
> > to my objective function (confirmed using browser()) and output the
> > following:
> >
> > $par
> >  [1] NaN NaN NaN   0 NaN   0 NaN NaN NaN NaN NaN NaN NaN
> >
> > $objective
> > [1] 0
> >
> > $convergence
> > [1] 1
> >
> > $iterations
> > [1] 19
> >
> > $evaluations
> > function gradient
> >       87      542
> >
> > $message
> > [1] "gr cannot be computed at initial par (65)"
> >
> >
> > When I use trace = TRUE, I can see the following:
> >
> >   0:     32495.488: 0.0917404 0.703453  1.89661 1.11022e-16
> > 1.11022e-16 0.107479 1.11022e-16 1.11022e-16 1.11022e-16 0.472377
> > 0.894128  1.86743 1.11022e-16
> >   1:     4035.3900: 0.0917404 0.703453  1.89661 1.11022e-16
> > 1.11022e-16 0.107479 1.11022e-16 1.11022e-16 1.11022e-16 0.472377
> > 0.894128  1.86743 0.250000
> >   2:     3955.8801: 0.0948452 0.704168  1.89651 0.000135456 0.0310485
> > 0.107991 0.00138902 0.000427631 1.11022e-16 0.472331 0.894128  1.86743
> > 0.250000
> >   3:     3951.4141: 0.0948926 0.703906  1.89640 2.99167e-05 0.0315288
> > 0.109692 0.00242572 0.00272185 7.96814e-05 0.472780 0.894130  1.86744
> > 0.249998
> > ....
> >  17:     3937.3923: 0.0947470 0.703030  1.89605 1.11022e-16 0.0300763
> > 0.115081 0.00562496 0.00989997 0.000323268 0.474247 0.894142  1.86745
> > 0.249737
> >  18:     3937.3923: 0.0947470 0.703030  1.89605 1.11022e-16 0.0300763
> > 0.115081 0.00562496 0.00989997 0.000323268 0.474247 0.894142  1.86745
> > 0.249737
> >  19:    -0.0000000:     -nan     -nan     -nan 1.11022e-16     -nan
> >  -nan     -nan     -nan     -nan     -nan     -nan     -nan      nan
> >
> >
> > my objective function looks like:
> >
> > nLL <- function(params){
> >
> >   mu <- drop(model.matrix(modelTermsObj) %*% params)
> >
> >   if(any(mu < 0) || anyNA(mu) || any(is.infinite(mu))){
> >     return(.Machine$double.xmax)
> >   } else {
> >     return(-sum(dnbinom(x=args$data[,response], mu = mu, size =
> > params[length(params)], log = TRUE)))
> >   }
> > }
> >
> > I tried different starting values, different bounds but without
> > success so far. Is this a bug?
> >
> > PS after trying to make a reproducible example that I gracefully
> > failed to do... I change my objective function so instead of using
> > model.matrix(), I did the maths (e.g. Y ~ A + B * C). Thus, mu is now
> > a bunch of NaN, and my objective function return .Machine$double.xmax
> > which is fine. Then nlminb stops and returns (like if nothing
> > happened):
> >
> > $par
> >  [1] 1.11022e-16 1.11022e-16 2.69205e-04 1.11022e-16 1.68161e-03
> > 1.06027e-03 1.16969e-05 1.11022e-16 8.51669e+01 7.31162e+01
> > 5.04748e+00 5.28373e+00 1.23992e-01
> >
> > $objective
> > [1] 3823.567
> >
> > $convergence
> > [1] 0
> >
> > $iterations
> > [1] 1
> >
> > $evaluations
> > function gradient
> >        2       13
> >
> > $message
> > [1] "X-convergence (3)"
> >
> > I can provide the data and model if necessary but cannot make them
> > publicly available (yet).
> >
> > Thank you,
> >
> > Jean
>
> ______________________________________________
> R-help at r-project.org mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>

	[[alternative HTML version deleted]]



More information about the R-help mailing list