[R] I can't get seq to behave how I think it should

Jeff Newmiller jdnewm|| @end|ng |rom dcn@d@v|@@c@@u@
Thu Jan 17 16:06:09 CET 2019


... then you still don't understand. Perhaps you might find [1] helpful. Also, adding a floating point representation of 0.001 to 1.4 for 400 times does not yield the same approximation of 1.8 that you get by directly converting the string "1.8" that you typed into your R interpreter.

[1] https://www.exploringbinary.com/why-0-point-1-does-not-exist-in-floating-point/

On January 17, 2019 6:56:48 AM PST, "POLWART, Calum (COUNTY DURHAM AND DARLINGTON NHS FOUNDATION TRUST) via R-help" <r-help using r-project.org> wrote:
>Well I get the issue with finite precision. As in SQRT(2) * SQRT(2) is
>not 2.
>
>What surprised me was that seq(1.4, 2.1, by=0.001) starts at
>1.3999999999999999 and not 1.4!
>
>
>-----Original Message-----
>From: PIKAL Petr [mailto:petr.pikal using precheza.cz]
>Sent: 17 January 2019 14:30
>To: POLWART, Calum (COUNTY DURHAM AND DARLINGTON NHS FOUNDATION TRUST);
>Ben Tupper
>Cc: r-help using r-project.org
>Subject: RE: [R] I can't get seq to behave how I think it should
>
>Hi
>
>It is not seq problem, it is floating point numbers representation in
>finit precision problem. Ben pointed to it and you could learn about it
>from FAQ 7.31.
>
>Cheers
>Petr
>
>> -----Original Message-----
>> From: POLWART, Calum (COUNTY DURHAM AND DARLINGTON NHS FOUNDATION
>> TRUST) <calum.polwart using nhs.net>
>> Sent: Thursday, January 17, 2019 2:56 PM
>> To: PIKAL Petr <petr.pikal using precheza.cz>; Ben Tupper
>> <btupper using bigelow.org>
>> Cc: r-help using r-project.org
>> Subject: RE: [R] I can't get seq to behave how I think it should
>>
>> Thanks guys.
>>
>> I've used Petr's method and its working for me.
>>
>> If the data had been from a calculation I'd have rounded it... just
>> didn't expect seq to break it!
>>
>> C
>>
>> -----Original Message-----
>> From: PIKAL Petr [mailto:petr.pikal using precheza.cz]
>> Sent: 17 January 2019 13:53
>> To: Ben Tupper; POLWART, Calum (COUNTY DURHAM AND DARLINGTON NHS
>> FOUNDATION TRUST)
>> Cc: r-help using r-project.org
>> Subject: RE: [R] I can't get seq to behave how I think it should
>>
>> Hi
>>
>> Or you could use rounding.
>> which(round(lut, 3)==1.8)
>> [1] 401
>>
>> Cheers
>> Petr
>>
>> > -----Original Message-----
>> > From: R-help <r-help-bounces using r-project.org> On Behalf Of Ben Tupper
>> > Sent: Thursday, January 17, 2019 2:43 PM
>> > To: POLWART, Calum (COUNTY DURHAM AND DARLINGTON NHS
>> FOUNDATION TRUST)
>> > <calum.polwart using nhs.net>
>> > Cc: r-help using r-project.org
>> > Subject: Re: [R] I can't get seq to behave how I think it should
>> >
>> > Hi,
>> >
>> > This looks like a floating point reality bump - see
>> >
>> >
>https://cran.r-project.org/doc/FAQ/R-FAQ.html#Why-doesn_0027t-R-thin
>> > k- these-numbers-are-equal_003f
>> > <https://cran.r-project.org/doc/FAQ/R-
>> > FAQ.html#Why-doesn_0027t-R-think-these-numbers-are-equal_003f>
>> >
>> > You can use other methods to finding your row - I would opt for
>> > findInterval()
>> >
>> > > lut = seq(1.4, 2.1, by=0.001)
>> > > findInterval(1.8, lut)
>> > [1] 401
>> >
>> > findInterval() uses a rapid search to find the index in the look up
>> > table (lut) that is just less than  or equal to the search value
>(in
>> > your example
>> 1.8).
>> >
>> > Cheers,
>> > Ben
>> >
>> > > On Jan 17, 2019, at 8:33 AM, POLWART, Calum (COUNTY DURHAM AND
>> > DARLINGTON NHS FOUNDATION TRUST) via R-help <r-help using r-project.org>
>> > wrote:
>> > >
>> > > I am using seq with the expression seq(1.4, 2.1, by=0.001) to
>> > > create a sequence of references from 1.4 to 2.1 in 0.001
>> > > increments.  They appear to be created correctly.  They have a
>> > > related pair of data which for the purposes of this we will call
>> > > val.  I'm interested in the content on the row with seq = 1.8.
>But
>> > > I can't seem to get it returned.  I can get other values but not
>> > > 1.8!  yet looking at row
>> > > 401 there is nothing to indicate an issue
>> > >
>> > >> a = 1.4
>> > >> b = 2.1
>> > >> seq = seq(a, b, by=0.001)
>> > >> val = ceiling(seq * 50)
>> > >> s=data.frame(seq, val)
>> > >> s$val[seq==1.799]
>> > > [1] 90
>> > >> s$val[s$seq==1.8]
>> > > numeric(0)
>> > >> s$val[seq==1.8]
>> > > numeric(0)
>> > >> s$val[s$seq==1.800]
>> > > numeric(0)
>> > >> s$val[s$seq==1.801]
>> > > [1] 91
>> > >> head(s[s$seq>1.798,])
>> > >      seq val
>> > > 400 1.799  90
>> > > 401 1.800  90
>> > > 402 1.801  91
>> > > 403 1.802  91
>> > > 404 1.803  91
>> > > 405 1.804  91
>> > >
>> > >
>> > > Can anyone explain what's going on here and how I would correctly
>> > > find the
>> > content of row 401 by using an expression to equal the seq column?
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> >
>> *******************************************************************
>> > ***
>> > > **********************************************
>> > >
>> > > This message may contain confidential information. If
>> > > ...{{dropped:25}}
>> >
>> > ______________________________________________
>> > R-help using r-project.org mailing list -- To UNSUBSCRIBE and more, see
>> > https://stat.ethz.ch/mailman/listinfo/r-help
>> > PLEASE do read the posting guide
>> > http://www.R-project.org/posting-guide.html
>> > and provide commented, minimal, self-contained, reproducible code.
>> Osobní údaje: Informace o zpracování a ochraně osobních údajů
>> obchodních partnerů PRECHEZA a.s. jsou zveřejněny na:
>> https://www.precheza.cz/zasady- ochrany-osobnich-udaju/ | Information
>> about processing and protection of business partner’s personal data
>are available on website:
>> https://www.precheza.cz/en/personal-data-protection-principles/
>> Důvěrnost: Tento e-mail a jakékoliv k němu připojené dokumenty jsou
>> důvěrné a podléhají tomuto právně závaznému prohláąení o vyloučení
>odpovědnosti:
>> https://www.precheza.cz/01-dovetek/ | This email and any documents
>> attached to it may be confidential and are subject to the legally
>> binding
>> disclaimer: https://www.precheza.cz/en/01-disclaimer/
>>
>>
>>
>> *******************************************************************
>> *************************************************
>>
>> This message may contain confidential information. If you are not the
>> intended recipient please inform the sender that you have received
>the
>> message in error before deleting it.
>> Please do not disclose, copy or distribute information in this e-mail
>> or take any action in relation to its contents. To do so is strictly
>> prohibited and may be unlawful. Thank you for your co-operation.
>>
>> NHSmail is the secure email and directory service available for all
>> NHS staff in England and Scotland. NHSmail is approved for exchanging
>> patient data and other sensitive information with NHSmail and other
>accredited email services.
>>
>> For more information and to find out how you can switch,
>> https://portal.nhs.net/help/joiningnhsmail
>
>Osobní údaje: Informace o zpracování a ochraně osobních údajů
>obchodních partnerů PRECHEZA a.s. jsou zveřejněny na:
>https://www.precheza.cz/zasady-ochrany-osobnich-udaju/ | Information
>about processing and protection of business partner’s personal data are
>available on website:
>https://www.precheza.cz/en/personal-data-protection-principles/
>Důvěrnost: Tento e-mail a jakékoliv k němu připojené dokumenty jsou
>důvěrné a podléhají tomuto právně závaznému prohláąení o vyloučení
>odpovědnosti: https://www.precheza.cz/01-dovetek/ | This email and any
>documents attached to it may be confidential and are subject to the
>legally binding disclaimer: https://www.precheza.cz/en/01-disclaimer/
>
>
>
>********************************************************************************************************************
>
>This message may contain confidential information. If you are not the
>intended recipient please inform the
>sender that you have received the message in error before deleting it.
>Please do not disclose, copy or distribute information in this e-mail
>or take any action in relation to its contents. To do so is strictly
>prohibited and may be unlawful. Thank you for your co-operation.
>
>NHSmail is the secure email and directory service available for all NHS
>staff in England and Scotland. NHSmail is approved for exchanging
>patient data and other sensitive information with NHSmail and other
>accredited email services.
>
>For more information and to find out how you can switch,
>https://portal.nhs.net/help/joiningnhsmail
>
>______________________________________________
>R-help using r-project.org mailing list -- To UNSUBSCRIBE and more, see
>https://stat.ethz.ch/mailman/listinfo/r-help
>PLEASE do read the posting guide
>http://www.R-project.org/posting-guide.html
>and provide commented, minimal, self-contained, reproducible code.

-- 
Sent from my phone. Please excuse my brevity.



More information about the R-help mailing list