[R] Help with spTransform() function and final plot colors

Poling, William Po||ngW @end|ng |rom @etn@@com
Sun May 17 12:20:18 CEST 2020


Hello, I have found an additional problem.

I should be getting 3 columns back in the xy using data at some point.
$ ID                           : int  1 2 3 4 5 6 7 8 9 10 ...
# $ Clust                  : int  1 1 1 1 1 1 1 1 1 1 ... This is always - 1
# $ Clust.1               : int  1 1 1 1 1 1 1 1 1 1 ... This would be the cluster number, like 1-3, I am not getting this column back?


Yet the plot runs and indicates three different clusters?



WHP


Proprietary

-----Original Message-----
From: Poling, William <PolingW using aetna.com> 
Sent: Sunday, May 17, 2020 4:50 AM
To: r-help using r-project.org
Cc: Poling, William <PolingW using aetna.com>
Subject: Help with spTransform() function and final plot colors

#RStudio Version Version 1.2.1335
sessionInfo()
# R version 4.0.0 Patched (2020-05-03 r78349)
#Platform: x86_64-w64-mingw32/x64 (64-bit) #Running under: Windows 10 x64 (build 17763)

Hello. I am running my data through a routine I found that finds clusters of data points based on distance rule.
https://gis.stackexchange.com/questions/64392/finding-clusters-of-points-based-distance-rule-using-r

1. I get this error when I get to this point in the routine, see complete routine below?
xy <- spTransform(xy, CRS("+init=epsg:27700 +datum=WGS84")) non finite transformation detected:

I tried converting columns from numeric to Integer but did not help.

However, I continue to run the rest of the routine and the final sequence, the plot itself, seems to work Can this error be corrected somehow, despite the fact that it continues to work, just curious what it is I guess"

2. However in the plot at the end of the routine the color key appears with the colors but the clusters in the plot are black, see plot call at the end of the routine below?

Thank you for any advice.

WHP

ERROR:
non finite transformation detected:
      coords.x1 coords.x2        
 [1,] -119.7339  39.53939 Inf Inf
 [2,] -119.7665  39.39630 Inf Inf
 [3,] -119.7794  39.28768 Inf Inf
 [4,] -121.0234  39.20503 Inf Inf
 [5,] -122.0047  47.19262 Inf Inf
 [6,] -122.0135  47.18883 Inf Inf
 [7,] -122.0379  47.52190 Inf Inf
 [8,] -122.0578  47.60975 Inf Inf
 [9,] -122.1330  47.13669 Inf Inf
[10,] -122.1509  47.55962 Inf Inf
[11,] -122.1706  47.15546 Inf Inf
[12,] -122.1846  47.23485 Inf Inf
[13,] -122.1846  48.15307 Inf Inf
[14,] -122.1851  47.44870 Inf Inf
[15,] -122.1954  47.68485 Inf Inf
[16,] -122.1990  47.51610 Inf Inf
[17,] -122.2014  47.44772 Inf Inf
[18,] -122.2025  47.69815 Inf Inf
[19,] -122.2037  47.67190 Inf Inf
[20,] -122.2090  47.40378 Inf Inf
[21,] -122.2108  47.25336 Inf Inf
[22,] -122.2291  47.63880 Inf Inf
[23,] -122.2419  47.76870 Inf Inf
[24,] -122.2722  48.04803 Inf Inf
[25,] -122.2732  47.87700 Inf Inf
[26,] -122.2804  47.77620 Inf Inf
[27,] -122.2839  47.82103 Inf Inf
[28,] -122.2890  47.86899 Inf Inf
[29,] -122.2993  47.67306 Inf Inf
[30,] -122.3180  47.38217 Inf Inf
[31,] -122.3270  47.40378 Inf Inf
[32,] -122.3474  47.43884 Inf Inf
[33,] -122.3484  47.53083 Inf Inf
[34,] -122.3581  47.27678 Inf Inf
[35,] -122.3618  47.76735 Inf Inf
[36,] -122.3700  47.56567 Inf Inf
[37,] -122.3908  47.54938 Inf Inf
[38,] -122.4128  47.64622 Inf Inf
[39,] -122.4293  47.17660 Inf Inf
[40,] -122.4621  47.44505 Inf Inf
[41,] -122.4904  47.27460 Inf Inf
[42,] -122.5515  46.93979 Inf Inf
[43,] -122.7348  42.37320 Inf Inf
[44,] -122.7827  47.31059 Inf Inf
[45,] -122.7987  47.23475 Inf Inf
[46,] -122.8385  42.35119 Inf Inf
[47,] -122.8537  42.34495 Inf Inf
[48,] -122.8904  42.39555 Inf Inf
[49,] -122.8927  42.33022 Inf Inf
[50,] -122.9451  47.37574 Inf Inf
[51,] -122.9594  42.30376 Inf Inf
[52,] -123.0641  47.16428 Inf Inf
[53,] -123.3413  42.44117 Inf Inf
Error in spTransform(xSP, CRSobj, ...) : 
  failure in points 1:2:3:4:5:6:7:8:9:10:11:12:13:14:15:16:17:18:19:20:21:22:23:24:25:26:27:28:29:30:31:32:33:34:35:36:37:38:39:40:41:42:43:44:45:46:47:48:49:50:51:52:53
In addition: Warning message:
In spTransform(xSP, CRSobj, ...) : 53 projected point(s) not finite

Here is the data:
dput(sample)
structure(list(ID = 1:53, Longitude = c(-119.733899, -119.766493, -119.779416, -121.0234, -122.004736, -122.013456, -122.0379, -122.0578, -122.132971, -122.150901, -122.170608, -122.18462, -122.184639, -122.185079, -122.195398, -122.198994, -122.201356, -122.202507, -122.20371, -122.209047, -122.210797, -122.229095, -122.2419, -122.27216, -122.273164, -122.280355, -122.28389, -122.289043, -122.299261, -122.318009, -122.326987, -122.347382, -122.34844, -122.358115, -122.361839, -122.37003, -122.390815, -122.41282, -122.429323, -122.462136, -122.490417, -122.551483, -122.734847, -122.782736, -122.798669, -122.838498, -122.853683, -122.8904, -122.89271, -122.94511, -122.959407, -123.064087, -123.341346), Latitude = c(39.53939, 39.396298, 39.287681, 39.205028, 47.192616, 47.188833, 47.5219, 47.609748, 47.13669, 47.559616, 47.155455, 47.234849, 48.15307, 47.448697, 47.684854, 47.516104, 47.447723, 47.698146, 47.6719, 47.403778, 47.253364, 47.638795, 47.768701, 48.048027, 47.876997, 47.776205, 47.821029, 47.868987, 47.673056, 47.382165, 47.403785, 47.438836, 47.530831, 47.276776, 47.76735, 47.565667, 47.549377, 47.646222, 47.176596, 47.445053, 47.274599, 46.939789, 42.373195, 47.310595, 47.234748, 42.351189, 42.344953, 42.395547, 42.33022, 47.375736, 42.303755, 47.164278, 42.441172)), class = "data.frame", row.names = c(NA, -53L))

Here is the routine:
require(sp)
require(rgdal)
#25*1609.34 = 40233.5      
dis <- 40233.5 #Distance threshold 25miles converted to meters

x <- tmp1b[,c(6)]
head(x)
y <- tmp1b[,c(5)]
head(y)
str(y)

xy <- SpatialPointsDataFrame(matrix(c(x,y), ncol=2), data.frame(ID=seq(1:length(x))),
                             proj4string=CRS("+proj=longlat +ellps=WGS84 +datum=WGS84"))

str(xy)

xy <- spTransform(xy, CRS("+init=epsg:27700 +datum=WGS84"))#Error occurring here?

chc <- hclust(dist(data.frame(rownames=rownames(xy using data), x=coordinates(xy)[,1], #What is xy using data???? see str(xy)
                              y=coordinates(xy)[,2])), method="complete")
str(chc)

view(xy using data)#Look like 3 clusters

# Distance with a 25 Mile threshold
chc.dis <- cutree(chc, h=dis)
str(chc.dis)
view(chc.dis)

# Join results to meuse sp points
xy using data <- data.frame(xy using data, Clust=chc.dis)
str(xy using data)
view(xy using data)

# Plot results
plot(xy, col=factor(xy using data$Clust), pch=19)
box(col="black")
title(main="Clustering")
legend("topleft", legend=paste("Cluster", 1:3,sep=""),#Change from 4 in demo to 3 in my data
       col=palette()[1:3], pch=rep(19,3), bg="white")




Proprietary

NOTICE TO RECIPIENT OF INFORMATION:\ This e-mail may con...{{dropped:16}}



More information about the R-help mailing list