[R] mgcv: relative risk from GAM with distributed lag

Simon Wood @|mon@wood @end|ng |rom b@th@edu
Sat Jul 23 22:26:20 CEST 2022


I doubt you want a 7 by 1000 grid for your persp plot. Here's an example 
of producing a persp plot using predict.gam and a custom grid. Since 
only the effects of x1 and x2 are being plotted it doesn't matter what 
x0 and x3 are set to (the model is additive after all). In your case 
only one smooth term is involved of course.

library(mgcv)
n <- 200
sig <- 2
dat <- gamSim(1,n=n,scale=sig)

b <- gam(y~s(x0)+s(I(x1^2))+s(x2)+offset(x3),data=dat)

m1 <- 20;m2 <- 30; n <- m1*m2
x1 <- seq(.2,.8,length=m1);x2 <- seq(.2,.8,length=m2) ## marginal values 
for evaluation grid
df <- data.frame(x0=rep(.5,n),x1=rep(x1,m2),x2=rep(x2,each=m1),x3=rep(0,n))
pf <- predict(b,newdata=df,type="terms")

persp(x1,x2,matrix(pf[,2]+pf[,3],m1,m2),theta=-130,col="blue",zlab="")

On 23/07/2022 14:54, jade.shodan using googlemail.com wrote:
> Hi Simon and all,
>
> I've corrected some mistakes in setting up the prediction data frame
> (sorry, very stressed and sleep deprived due to closing in deadlines),
> but am having problems getting the perspective plot using persp().
>
> I've calculated relative risk (RR) but am having trouble getting the
> perspective (or contour) plot. persp() takes x and y vectors in
> ascending order, and z as a matrix.  I've seen the outer() function
> being used to facilitate perspective plots, but every example I've
> seen treats z as a function, to be evaluated at combinations for x and
> y. In my case, I already have observations for z. Not sure if I need
> to use outer(), and if so, how?
>
> My code for making predictions, getting RR and trying to get the plot
> is as follows (full reproducible example including model at the
> bottom). Can someone tell me what I'm doing wrong?
>
> ########### CODE ########################
>
> # create prediction data
> N <- 1000 # number of points for which to predict the smooths
> pred_temp <- seq(min(dat$temp, na.rm = T), max(dat$temp, na.rm = T),
> length = N)  # prediction data for temperature
> pred_lag <- rep(c(0, 1,2,3,4,5,6),each=N)
> pred_rain <- seq(min(dat$rain, na.rm = T), max(dat$rain, na.rm = T), length = N)
> pred_humidity <- seq(min(dat$humidity, na.rm = T), max(dat$humidity,
> na.rm = T), length = N)
> pred_time <- seq(min(dat$time, na.rm = T), max(dat$time, na.rm = T), length = N)
>
> pd <- data.frame(temp = pred_temp, lag = pred_lag, humidity =
> pred_humidity, rain = pred_rain, time = pred_time)
>
> # create prediction data with reference temperature set to median temperature
> # identical to pd but now with all temperatures set to median value of
> temperature
> pred_temp0 <- rep(median(dat$temp, na.rm=T), N)
> pd0 <- data.frame(temp = pred_temp0, lag = pred_lag, humidity =
> pred_humidity, rain = pred_rain, time = pred_time)
>
> # make predictions
> predictions <- predict.gam(mod, pd, type = "terms")
> predictions0 <- predict.gam(mod, pd0, type = "terms")
>
> # calculate RR
> diff <- predictions[,2] - predictions0[,2]
> rr <- as.vector(exp(diff))
>
> # convert rr to matrix required for z argument for persp()
> rr_mat <- matrix(rr, nrow = N)
> persp(pred_temp, pred_lag, rr_mat)
>
> ######### ERROR MESSAGE ##################################
>
> The persp call results in the follow error:
>
> Error in persp.default(pred_temp, pred_lag, rr_mat) :
>    increasing 'x' and 'y' values expected
>
> I don't understand this because pred_temp and pred_lag ARE in ascending order.
>
> ############################################################
> FULL REPRODUCIBLE EXAMPLE
> ############################################################
>
> library(mgcv)
> set.seed(3) # make reproducible example
> simdat <- gamSim(1,400)
> g <- exp(simdat$f/5)
>
> simdat$y <- rnbinom(g,size=3,mu=g)  # negative binomial response var
> simdat$time <- 1:400  # create time series
>
> names(simdat) <- c("deaths", "temp", "humidity", "rain", "x3", "f",
> "f0", "f1", "f2", "f3", "time")
>
> # lag function based on Wood (book 2017, p.349 and gamair package
> documentation p.54
> # https://cran.rstudio.com/web/packages/gamair/gamair.pdf)
> lagard <- function(x,n.lag=7) {
> n <- length(x); X <- matrix(NA,n,n.lag)
> for (i in 1:n.lag) X[i:n,i] <- x[i:n-i+1]
> X
> }
>
> # set up lag, temp, rain and humidity as 7-column matrices
> # to create lagged variables
> dat <- list(lag=matrix(0:6,nrow(simdat),7,byrow=TRUE),
> deaths=simdat$deaths, time = simdat$time)
> dat$temp <- lagard(simdat$temp)
> dat$rain <- lagard(simdat$rain)
> dat$humidity <- lagard(simdat$humidity)
>
> mod <- gam(deaths~s(time, k=70) + te(temp, lag, k=c(12, 4)) +
> te(humidity, lag, k=c(12, 4)) + te(rain, lag, k=c(12, 4)), data = dat,
> family = nb, method = 'REML', select = TRUE)
>
> summary(mod)
> plot(mod, scheme = 1)  # perspective
> plot(mod, scheme = 2)  # contour
>
> # create prediction data
> N <- 1000 # number of points for which to predict the smooths
> pred_temp <- seq(min(dat$temp, na.rm = T), max(dat$temp, na.rm = T), length = N)
> pred_lag <- rep(c(0, 1,2,3,4,5,6),each=N)
> pred_rain <- seq(min(dat$rain, na.rm = T), max(dat$rain, na.rm = T), length = N)
> pred_humidity <- seq(min(dat$humidity, na.rm = T), max(dat$humidity,
> na.rm = T), length = N)
> pred_time <- seq(min(dat$time, na.rm = T), max(dat$time, na.rm = T), length = N)
>
> pd <- data.frame(temp = pred_temp, lag = pred_lag, humidity =
> pred_humidity, rain = pred_rain, time = pred_time)
>
> # create prediction data with reference temperature set to median temperature
> # identical to pd but now with all temperatures set to median value of
> temperature
> pred_temp0 <- rep(median(dat$temp, na.rm=T), N)
> pd0 <- data.frame(temp = pred_temp0, lag = pred_lag, humidity =
> pred_humidity, rain = pred_rain, time = pred_time)
>
> # make predictions
> predictions <- predict.gam(mod, pd, type = "terms")
> predictions0 <- predict.gam(mod, pd0, type = "terms")
>
> # calculate RR
> diff <- predictions[,2] - predictions0[,2]
> rr <- as.vector(exp(diff))
>
> # convert rr to matrix required for z argument for persp()
> rr_mat <- matrix(rr, nrow = N)
> persp(pred_temp, pred_lag, rr_mat)
>
>
>
>
> On Fri, 22 Jul 2022 at 13:29, jade.shodan using googlemail.com
> <jade.shodan using googlemail.com> wrote:
>> I made a small error in the code below (not checking for NAs which are
>> introduced by the lag function). However, this doesn't solve the issue
>> I raised).
>>
>> So here's the problem (with corrected code) again:
>>
>> I'm not sure what to do with the 'time' variable. (I don't want to
>> make predictions for specific points in time). I coded as follows
>> (full reproducible example at bottom of email), but get a warning and
>> error:
>>
>>
>> N <- 1000     # number of points for smooth to be predicted
>> # new temperatures and lags for prediction
>> pred_temp <- seq(min(dat$temp, na.rm = T), max(dat$temp, na.rm = T), length = N)
>> pred_lag <- rep(c(0, 1,2,3,4,5,6),each=N)      ## IS IT CORRECT TO SET
>> UP LAG LIKE THIS?
>>
>> # not sure if these covariates are required with type = "terms"
>> pred_humidity <- rep(median(dat$humidity, na.rm = T), N)
>> pred_rain <- rep(median(dat$rain, na.rm = T), N)
>> pd <- data.frame(temp = pred_temp, lag = pred_lag, humidity =
>> pred_humidity, rain = pred_rain)
>>
>> predictions <- predict(mod, pd, type = "terms")
>>
>>
>> The predict line creates the following warning and error:
>>
>> Warning in predict.gam(mod, pd, type = "terms") :
>>    not all required variables have been supplied in  newdata!
>>
>> Error in model.frame.default(ff, data = newdata, na.action = na.act) :
>>    object is not a matrix
>>
>>
>> For ease of reference, I've (re)included the full reproducible example:
>>
>> library(mgcv)
>> set.seed(3) # make reproducible example
>> simdat <- gamSim(1,400)
>> g <- exp(simdat$f/5)
>>
>> simdat$y <- rnbinom(g,size=3,mu=g)  # negative binomial response var
>> simdat$time <- 1:400  # create time series
>>
>> names(simdat) <- c("deaths", "temp", "humidity", "rain", "x3", "f",
>> "f0", "f1", "f2", "f3", "time")
>>
>> # lag function based on Wood (book 2017, p.349 and gamair package
>> documentation p.54
>> # https://cran.rstudio.com/web/packages/gamair/gamair.pdf)
>> lagard <- function(x,n.lag=7) {
>> n <- length(x); X <- matrix(NA,n,n.lag)
>> for (i in 1:n.lag) X[i:n,i] <- x[i:n-i+1]
>> X
>> }
>>
>> # set up lag, temp, rain and humidity as 7-column matrices
>> # to create lagged variables
>> dat <- list(lag=matrix(0:6,nrow(simda
>> t),7,byrow=TRUE),
>> deaths=simdat$deaths, time = simdat$time)
>> dat$temp <- lagard(simdat$temp)
>> dat$rain <- lagard(simdat$rain)
>> dat$humidity <- lagard(simdat$humidity)
>>
>> mod <- gam(deaths~s(time, k=70) + te(temp, lag, k=c(12, 4)) +
>> te(humidity, lag, k=c(12, 4)) + te(rain, lag, k=c(12, 4)), data = dat,
>> family = nb, method = 'REML', select = TRUE)
>>
>> # create prediction data
>> N <- 1000 # number of points for which to predict the smooths
>> pred_temp <- seq(min(dat$temp, na.rm = T), max(dat$temp, na.rm = T), length = N)
>> pred_lag <- rep(c(0, 1,2,3,4,5,6),each=N)
>> pred_humidity <- rep(median(dat$humidity), N)
>> pred_rain <- rep(median(dat$rain), N)
>> pd <- data.frame(temp = pred_temp, lag = pred_lag, humidity =
>> pred_humidity, rain = pred_rain)
>>
>> # make predictions
>> predictions <- predict(mod, pd, type = "terms")
>>
>> On Fri, 22 Jul 2022 at 12:47, jade.shodan using googlemail.com
>> <jade.shodan using googlemail.com> wrote:
>>> Hi Simon,
>>>
>>> Thanks for the pointers! But I'm not sure what to do with the 'time'
>>> variable. (I don't want to make predictions for specific points in
>>> time). I coded as follows (full reproducible example at bottom of
>>> email), but get a warning and error:
>>>
>>>
>>> N <- 1000     # number of points for smooth to be predicted
>>> # new temperatures and lags for prediction
>>> pred_temp <- seq(min(dat$temp, na.rm = T), max(dat$temp, na.rm = T), length = N)
>>> pred_lag <- rep(c(0, 1,2,3,4,5,6),each=N)      ## IS IT CORRECT TO SET
>>> UP LAG LIKE THIS?
>>>
>>> # not sure if these covariates are required with type = "terms"
>>> pred_humidity <- rep(median(dat$humidity), N)
>>> pred_rain <- rep(median(dat$rain), N)
>>> pd <- data.frame(temp = pred_temp, lag = pred_lag, humidity =
>>> pred_humidity, rain = pred_rain)
>>>
>>> predictions <- predict(mod, pd, type = "terms")
>>>
>>>
>>> The predict line creates the following warning and error:
>>>
>>> Warning in predict.gam(mod, pd, type = "terms") :
>>>    not all required variables have been supplied in  newdata!
>>>
>>> Error in model.frame.default(ff, data = newdata, na.action = na.act) :
>>>    object is not a matrix
>>>
>>>
>>> For ease of reference, I've (re)included the full reproducible example:
>>>
>>> library(mgcv)
>>> set.seed(3) # make reproducible example
>>> simdat <- gamSim(1,400)
>>> g <- exp(simdat$f/5)
>>>
>>> simdat$y <- rnbinom(g,size=3,mu=g)  # negative binomial response var
>>> simdat$time <- 1:400  # create time series
>>>
>>> names(simdat) <- c("deaths", "temp", "humidity", "rain", "x3", "f",
>>> "f0", "f1", "f2", "f3", "time")
>>>
>>> # lag function based on Wood (book 2017, p.349 and gamair package
>>> documentation p.54
>>> # https://cran.rstudio.com/web/packages/gamair/gamair.pdf)
>>> lagard <- function(x,n.lag=7) {
>>> n <- length(x); X <- matrix(NA,n,n.lag)
>>> for (i in 1:n.lag) X[i:n,i] <- x[i:n-i+1]
>>> X
>>> }
>>>
>>> # set up lag, temp, rain and humidity as 7-column matrices
>>> # to create lagged variables
>>> dat <- list(lag=matrix(0:6,nrow(simdat),7,byrow=TRUE),
>>> deaths=simdat$deaths, time = simdat$time)
>>> dat$temp <- lagard(simdat$temp)
>>> dat$rain <- lagard(simdat$rain)
>>> dat$humidity <- lagard(simdat$humidity)
>>>
>>> mod <- gam(deaths~s(time, k=70) + te(temp, lag, k=c(12, 4)) +
>>> te(humidity, lag, k=c(12, 4)) + te(rain, lag, k=c(12, 4)), data = dat,
>>> family = nb, method = 'REML', select = TRUE)
>>>
>>> # create prediction data
>>> N <- 1000 # number of points for which to predict the smooths
>>> pred_temp <- seq(min(dat$temp, na.rm = T), max(dat$temp, na.rm = T), length = N)
>>> pred_lag <- rep(c(0, 1,2,3,4,5,6),each=N)
>>> pred_humidity <- rep(median(dat$humidity), N)
>>> pred_rain <- rep(median(dat$rain), N)
>>> pd <- data.frame(temp = pred_temp, lag = pred_lag, humidity =
>>> pred_humidity, rain = pred_rain)
>>>
>>> # make predictions
>>> predictions <- predict(mod, pd, type = "terms")
>>>
>>>
>>> On Fri, 22 Jul 2022 at 09:54, Simon Wood <simon.wood using bath.edu> wrote:
>>>>
>>>> On 21/07/2022 15:19, jade.shodan--- via R-help wrote:
>>>>> Hello everyone (incl. Simon Wood?),
>>>>>
>>>>> I'm not sure that my original question (see below, including
>>>>> reproducible example) was as clear as it could have been. To clarify,
>>>>> what I would to like to get is:
>>>>>
>>>>> 1) a perspective plot of temperature x lag x relative risk.  I know
>>>>> how to use plot.gam and vis.gam but don't know how to get plots on the
>>>>> relative risk scale as opposed to  "response" or "link".
>>>> - You are on the log scale so I think that all you need to do is to use
>>>> 'predict.gam', with 'type = "terms"' to  get the predictions for the
>>>> te(temp, lag) term over the required grid of lags and temperatures.
>>>> Suppose the dataframe of prediction data is 'pd'. Now produce pd0, which
>>>> is identical to pd, except that the temperatures are all set to the
>>>> reference temperature. Use predict.gam to predict te(temp,lag) from pd0.
>>>> Now the exponential of the difference between the first and second
>>>> predictions is the required RR, which you can plot using 'persp',
>>>> 'contour', 'image' or whatever. If you need credible intervals see pages
>>>> 341-343 of my 'GAMs: An intro with R' book (2nd ed).
>>>>
>>>>> 2) a plot of relative risk (accumulated across all lags) vs
>>>>> temperature, given a reference temperature. An example of such a plot
>>>>> can be found in figure 2 (bottom) of this paper by Gasparrini et al:
>>>>> https://onlinelibrary.wiley.com/doi/abs/10.1002/sim.3940
>>>> - I guess this only makes sense if you have the same temperature at all
>>>> lags. So this time produce a data.frame with each desired temperature
>>>> repeated for each lag: 'pd1'. Again use predict.gam(...,type="terms").
>>>> Then sum the predictions over lags for each temperature, subtract the
>>>> minimum, and take the exponential. Same as above for CIs.
>>>>
>>>> best,
>>>>
>>>> Simon
>>>>
>>>>> I've seen Simon Wood's response to a related issue here:
>>>>> https://stat.ethz.ch/pipermail/r-help/2012-May/314387.html
>>>>> However, I'm not sure how to apply this to time series data with
>>>>> distributed lag, to get the above mentioned figures.
>>>>>
>>>>> Would be really grateful for suggestions!
>>>>>
>>>>> Jade
>>>>>
>>>>> On Tue, 19 Jul 2022 at 16:07, jade.shodan using googlemail.com
>>>>> <jade.shodan using googlemail.com> wrote:
>>>>>> Dear list members,
>>>>>>
>>>>>> Does anyone know how to obtain a relative risk/ risk ratio from a GAM
>>>>>> with a distributed lag model implemented in mgcv? I have a GAM
>>>>>> predicting daily deaths from time series data consisting of daily
>>>>>> temperature, humidity and rainfall. The GAM includes a distributed lag
>>>>>> model because deaths may occur over several days following a high heat
>>>>>> day.
>>>>>>
>>>>>> What I'd like to do is compute (and plot) the relative risk
>>>>>> (accumulated across all lags) for a given temperature vs the
>>>>>> temperature at which the risk is lowest, with corresponding confidence
>>>>>> intervals. I am aware of the predict.gam function but am not sure if
>>>>>> and how it should be used in this case. (Additionally, I'd also like
>>>>>> to plot the relative risk for different lags separately).
>>>>>>
>>>>>> I apologise if this seems trivial to some. (Actually, I hope it is,
>>>>>> because that might mean I get a solution!) I've been looking for
>>>>>> examples on how to do this, but found nothing so far. Suggestions
>>>>>> would be very much appreciated!
>>>>>>
>>>>>> Below is a reproducible example with the GAM:
>>>>>>
>>>>>> library(mgcv)
>>>>>> set.seed(3) # make reproducible example
>>>>>> simdat <- gamSim(1,400) # simulate data
>>>>>> g <- exp(simdat$f/5)
>>>>>> simdat$y <- rnbinom(g,size=3,mu=g)  # negative binomial response var
>>>>>> simdat$time <- 1:400  # create time series
>>>>>> names(simdat) <- c("deaths", "temp", "humidity", "rain", "x3", "f",
>>>>>> "f0", "f1", "f2", "f3", "time")
>>>>>>
>>>>>> # lag function based on Simon Wood (book 2017, p.349 and gamair
>>>>>> package documentation p.54
>>>>>> # https://cran.rstudio.com/web/packages/gamair/gamair.pdf)
>>>>>> lagard <- function(x,n.lag=7) {
>>>>>> n <- length(x); X <- matrix(NA,n,n.lag)
>>>>>> for (i in 1:n.lag) X[i:n,i] <- x[i:n-i+1]
>>>>>> X
>>>>>> }
>>>>>>
>>>>>> # set up lag, temp, rain and humidity as 7-column matrices
>>>>>> # to create lagged variables - based on Simon Wood's example
>>>>>> dat <- list(lag=matrix(0:6,nrow(simdat),7,byrow=TRUE),
>>>>>> deaths=simdat$deaths, time = simdat$time)
>>>>>> dat$temp <- lagard(simdat$temp)
>>>>>> dat$rain <- lagard(simdat$rain)
>>>>>> dat$humidity <- lagard(simdat$humidity)
>>>>>>
>>>>>> mod <- gam(deaths~s(time, k=70) + te(temp, lag, k=c(12, 4)) +
>>>>>> te(humidity, lag, k=c(12, 4)) + te(rain, lag, k=c(12, 4)), data = dat,
>>>>>> family = nb, method = 'REML', select = TRUE)
>>>>>>
>>>>>> summary(mod)
>>>>>> plot(mod, scheme = 1)
>>>>>> plot(mod, scheme = 2)
>>>>>>
>>>>>> Thanks for any suggestions you may have,
>>>>>>
>>>>>> Jade
>>>>> ______________________________________________
>>>>> R-help using r-project.org mailing list -- To UNSUBSCRIBE and more, see
>>>>> https://stat.ethz.ch/mailman/listinfo/r-help
>>>>> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
>>>>> and provide commented, minimal, self-contained, reproducible code.
>>>> --
>>>> Simon Wood, School of Mathematics, University of Edinburgh,
>>>> https://www.maths.ed.ac.uk/~swood34/
>>>>
-- 
Simon Wood, School of Mathematics, University of Edinburgh,
https://www.maths.ed.ac.uk/~swood34/



More information about the R-help mailing list