[R] Problem when trying to install packages

Bert Gunter bgunter@4567 @end|ng |rom gm@||@com
Sat Mar 16 07:37:19 CET 2024


? Google it!  "How to install packages using Rtools"

Bert

On Sat, Mar 16, 2024, 05:09 javad bayat <j.bayat194 using gmail.com> wrote:

>  Dear Rui;
> Many thanks for your reply. I have installed Rtools (rtools43-5958-5975) on
> my PC and I have R version 4.3.3 and 4.3.2 to install. Also I have
> installed Rstudio through Anaconda Navigator.
> But I do not know how to use Rtools for installing the R packages. I would
> be more than happy if you help me.
> Sincerely yours
>
>
>
> > Dear Rui;
> > I hope this email finds you well. I have a problem installing packages in
> > Rstudio and R software. When I try to install a package, the software
> tries
> > to download but after downloading, it gives some errors and does not
> work.
> > I would be more than happy if you please help me to solve this issue.
> > Warm regards.
> >
> >
> >> install.packages("openair", type = "source")Installing package into
> ‘C:/R_Libs’
> > (as ‘lib’ is unspecified)Warning in install.packages :
> >    dependencies ‘lattice’, ‘MASS’ are not availablealso installing the
> > dependencies ‘deldir’, ‘RcppEigen’, ‘cli’, ‘glue’, ‘lifecycle’,
> > ‘pillar’, ‘rlang’, ‘tibble’, ‘tidyselect’, ‘vctrs’, ‘png’, ‘jpeg’,
> > ‘interp’, ‘timechange’, ‘maps’, ‘nlme’, ‘Matrix’, ‘cluster’, ‘dplyr’,
> > ‘hexbin’, ‘latticeExtra’, ‘lubridate’, ‘mapproj’, ‘mgcv’, ‘purrr’
> > trying URL '
> https://cran.rstudio.com/src/contrib/deldir_2.0-4.tar.gz'Content
> > type 'application/x-gzip' length 103621 bytes (101 KB)downloaded 101
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/RcppEigen_0.3.4.0.0.tar.gz'Content
> > type 'application/x-gzip' length 1765714 bytes (1.7 MB)downloaded 1.7
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/cli_3.6.2.tar.gz'Content
> > type 'application/x-gzip' length 569771 bytes (556 KB)downloaded 556
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/glue_1.7.0.tar.gz'Content
> > type 'application/x-gzip' length 105420 bytes (102 KB)downloaded 102
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/lifecycle_1.0.4.tar.gz'Content
> > type 'application/x-gzip' length 107656 bytes (105 KB)downloaded 105
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/pillar_1.9.0.tar.gz'Content
> > type 'application/x-gzip' length 444528 bytes (434 KB)downloaded 434
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/rlang_1.1.3.tar.gz'Content
> > type 'application/x-gzip' length 763765 bytes (745 KB)downloaded 745
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/tibble_3.2.1.tar.gz'Content
> > type 'application/x-gzip' length 565982 bytes (552 KB)downloaded 552
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/tidyselect_1.2.1.tar.gz'Content
> > type 'application/x-gzip' length 103591 bytes (101 KB)downloaded 101
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/vctrs_0.6.5.tar.gz'Content
> > type 'application/x-gzip' length 969066 bytes (946 KB)downloaded 946
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/png_0.1-8.tar.gz'Content
> > type 'application/x-gzip' length 24880 bytes (24 KB)downloaded 24 KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/jpeg_0.1-10.tar.gz'Content
> > type 'application/x-gzip' length 18667 bytes (18 KB)downloaded 18 KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/interp_1.1-6.tar.gz'Content
> > type 'application/x-gzip' length 1112116 bytes (1.1 MB)downloaded 1.1
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/timechange_0.3.0.tar.gz'Content
> > type 'application/x-gzip' length 103439 bytes (101 KB)downloaded 101
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/maps_3.4.2.tar.gz'Content
> > type 'application/x-gzip' length 2278051 bytes (2.2 MB)downloaded 2.2
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/nlme_3.1-164.tar.gz'Content
> > type 'application/x-gzip' length 836832 bytes (817 KB)downloaded 817
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/Matrix_1.6-5.tar.gz'Content
> > type 'application/x-gzip' length 2883851 bytes (2.8 MB)downloaded 2.8
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/cluster_2.1.6.tar.gz'Content
> > type 'application/x-gzip' length 369050 bytes (360 KB)downloaded 360
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/dplyr_1.1.4.tar.gz'Content
> > type 'application/x-gzip' length 1207521 bytes (1.2 MB)downloaded 1.2
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/hexbin_1.28.3.tar.gz'Content
> > type 'application/x-gzip' length 1199967 bytes (1.1 MB)downloaded 1.1
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/latticeExtra_0.6-30.tar.gz'Content
> > type 'application/x-gzip' length 1292936 bytes (1.2 MB)downloaded 1.2
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/lubridate_1.9.3.tar.gz'Content
> > type 'application/x-gzip' length 428043 bytes (418 KB)downloaded 418
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/mapproj_1.2.11.tar.gz'Content
> > type 'application/x-gzip' length 25544 bytes (24 KB)downloaded 24 KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/mgcv_1.9-1.tar.gz'Content
> > type 'application/x-gzip' length 1083217 bytes (1.0 MB)downloaded 1.0
> > MB
> > trying URL '
> https://cran.rstudio.com/src/contrib/purrr_1.0.2.tar.gz'Content
> > type 'application/x-gzip' length 220868 bytes (215 KB)downloaded 215
> > KB
> > trying URL '
> https://cran.rstudio.com/src/contrib/openair_2.18-2.tar.gz'Content
> > type 'application/x-gzip' length 1796725 bytes (1.7 MB)downloaded 1.7
> Hello,
>
> If you are on Windows, do you have rtools [1] installed?
>
>
>
>
> On Thu, Mar 14, 2024 at 6:47 PM Rui Barradas <ruipbarradas using sapo.pt> wrote:
>
> > Às 04:12 de 13/03/2024, javad bayat escreveu:
> > > Dear Rui;
> > > I hope this email finds you well. I have a problem installing packages
> in
> > > Rstudio and R software. When I try to install a package, the software
> > tries
> > > to download but after downloading, it gives some errors and does not
> > work.
> > > I would be more than happy if you please help me to solve this issue.
> > > Warm regards.
> > >
> > >
> > >> install.packages("openair", type = "source")Installing package into
> > ‘C:/R_Libs’
> > > (as ‘lib’ is unspecified)Warning in install.packages :
> > >    dependencies ‘lattice’, ‘MASS’ are not availablealso installing the
> > > dependencies ‘deldir’, ‘RcppEigen’, ‘cli’, ‘glue’, ‘lifecycle’,
> > > ‘pillar’, ‘rlang’, ‘tibble’, ‘tidyselect’, ‘vctrs’, ‘png’, ‘jpeg’,
> > > ‘interp’, ‘timechange’, ‘maps’, ‘nlme’, ‘Matrix’, ‘cluster’, ‘dplyr’,
> > > ‘hexbin’, ‘latticeExtra’, ‘lubridate’, ‘mapproj’, ‘mgcv’, ‘purrr’
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/deldir_2.0-4.tar.gz'Content
> > > type 'application/x-gzip' length 103621 bytes (101 KB)downloaded 101
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/RcppEigen_0.3.4.0.0.tar.gz'Content
> > > type 'application/x-gzip' length 1765714 bytes (1.7 MB)downloaded 1.7
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/cli_3.6.2.tar.gz'Content
> > > type 'application/x-gzip' length 569771 bytes (556 KB)downloaded 556
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/glue_1.7.0.tar.gz'Content
> > > type 'application/x-gzip' length 105420 bytes (102 KB)downloaded 102
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/lifecycle_1.0.4.tar.gz'Content
> > > type 'application/x-gzip' length 107656 bytes (105 KB)downloaded 105
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/pillar_1.9.0.tar.gz'Content
> > > type 'application/x-gzip' length 444528 bytes (434 KB)downloaded 434
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/rlang_1.1.3.tar.gz'Content
> > > type 'application/x-gzip' length 763765 bytes (745 KB)downloaded 745
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/tibble_3.2.1.tar.gz'Content
> > > type 'application/x-gzip' length 565982 bytes (552 KB)downloaded 552
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/tidyselect_1.2.1.tar.gz'Content
> > > type 'application/x-gzip' length 103591 bytes (101 KB)downloaded 101
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/vctrs_0.6.5.tar.gz'Content
> > > type 'application/x-gzip' length 969066 bytes (946 KB)downloaded 946
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/png_0.1-8.tar.gz'Content
> > > type 'application/x-gzip' length 24880 bytes (24 KB)downloaded 24 KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/jpeg_0.1-10.tar.gz'Content
> > > type 'application/x-gzip' length 18667 bytes (18 KB)downloaded 18 KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/interp_1.1-6.tar.gz'Content
> > > type 'application/x-gzip' length 1112116 bytes (1.1 MB)downloaded 1.1
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/timechange_0.3.0.tar.gz'Content
> > > type 'application/x-gzip' length 103439 bytes (101 KB)downloaded 101
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/maps_3.4.2.tar.gz'Content
> > > type 'application/x-gzip' length 2278051 bytes (2.2 MB)downloaded 2.2
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/nlme_3.1-164.tar.gz'Content
> > > type 'application/x-gzip' length 836832 bytes (817 KB)downloaded 817
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/Matrix_1.6-5.tar.gz'Content
> > > type 'application/x-gzip' length 2883851 bytes (2.8 MB)downloaded 2.8
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/cluster_2.1.6.tar.gz'Content
> > > type 'application/x-gzip' length 369050 bytes (360 KB)downloaded 360
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/dplyr_1.1.4.tar.gz'Content
> > > type 'application/x-gzip' length 1207521 bytes (1.2 MB)downloaded 1.2
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/hexbin_1.28.3.tar.gz'Content
> > > type 'application/x-gzip' length 1199967 bytes (1.1 MB)downloaded 1.1
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/latticeExtra_0.6-30.tar.gz'Content
> > > type 'application/x-gzip' length 1292936 bytes (1.2 MB)downloaded 1.2
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/lubridate_1.9.3.tar.gz'Content
> > > type 'application/x-gzip' length 428043 bytes (418 KB)downloaded 418
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/mapproj_1.2.11.tar.gz'Content
> > > type 'application/x-gzip' length 25544 bytes (24 KB)downloaded 24 KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/mgcv_1.9-1.tar.gz'Content
> > > type 'application/x-gzip' length 1083217 bytes (1.0 MB)downloaded 1.0
> > > MB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/purrr_1.0.2.tar.gz'Content
> > > type 'application/x-gzip' length 220868 bytes (215 KB)downloaded 215
> > > KB
> > > trying URL '
> > https://cran.rstudio.com/src/contrib/openair_2.18-2.tar.gz'Content
> > > type 'application/x-gzip' length 1796725 bytes (1.7 MB)downloaded 1.7
> > > MB
> > > * installing *source* package 'deldir' ...
> > > ** package 'deldir' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'deldir'
> > > * removing 'C:/R_Libs/deldir'
> > > Warning in install.packages :
> > >    installation of package ‘deldir’ had non-zero exit status
> > > * installing *source* package 'RcppEigen' ...
> > > ** package 'RcppEigen' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'RcppEigen'
> > > * removing 'C:/R_Libs/RcppEigen'
> > > Warning in install.packages :
> > >    installation of package ‘RcppEigen’ had non-zero exit status
> > > * installing *source* package 'cli' ...
> > > ** package 'cli' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'cli'
> > > * removing 'C:/R_Libs/cli'
> > > Warning in install.packages :
> > >    installation of package ‘cli’ had non-zero exit status
> > > * installing *source* package 'glue' ...
> > > ** package 'glue' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'glue'
> > > * removing 'C:/R_Libs/glue'
> > > Warning in install.packages :
> > >    installation of package ‘glue’ had non-zero exit status
> > > * installing *source* package 'rlang' ...
> > > ** package 'rlang' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'rlang'
> > > * removing 'C:/R_Libs/rlang'
> > > Warning in install.packages :
> > >    installation of package ‘rlang’ had non-zero exit status
> > > * installing *source* package 'png' ...
> > > ** package 'png' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > bash.exe: warning: could not find /tmp, please create!
> > >    checking PNG headers and libraries
> > > bash.exe: warning: could not find /tmp, please create!
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 179:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 180:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 181:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 182:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 183:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 319:
> > > make: command not found
> > > ./configure.win: line 17: make: command not found
> > > /lib/libpng.lib
> > >    found libpng in LOCAL_SOFT: /lib
> > >    seems ok, ready to go
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'png'
> > > * removing 'C:/R_Libs/png'
> > > Warning in install.packages :
> > >    installation of package ‘png’ had non-zero exit status
> > > * installing *source* package 'jpeg' ...
> > > ** package 'jpeg' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > bash.exe: warning: could not find /tmp, please create!
> > >    checking JPEG headers and libraries
> > > bash.exe: warning: could not find /tmp, please create!
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 179:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 180:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 181:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 182:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 183:
> > > make: command not found
> > > C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 319:
> > > make: command not found
> > > ./configure.win: line 17: make: command not found
> > > /lib/libjpeg.lib
> > >    found libjpeg in LOCAL_SOFT: /lib
> > >    seems ok, ready to go
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'jpeg'
> > > * removing 'C:/R_Libs/jpeg'
> > > Warning in install.packages :
> > >    installation of package ‘jpeg’ had non-zero exit status
> > > * installing *source* package 'timechange' ...
> > > ** package 'timechange' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'timechange'
> > > * removing 'C:/R_Libs/timechange'
> > > Warning in install.packages :
> > >    installation of package ‘timechange’ had non-zero exit status
> > > * installing *source* package 'maps' ...
> > > ** package 'maps' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > >
> > >     **********************************************
> > >     WARNING: this package has a configure script
> > >           It probably needs manual configuration
> > >     **********************************************
> > >
> > >
> > > ** libs
> > >    running 'src/Makefile.win' ...
> > > Warning in system(paste("make --no-print-directory", paste("-f",
> > > shQuote(makefiles),  :
> > >    'make' not found
> > > ERROR: compilation failed for package 'maps'
> > > * removing 'C:/R_Libs/maps'
> > > Warning in install.packages :
> > >    installation of package ‘maps’ had non-zero exit status
> > > ERROR: dependency 'lattice' is not available for package 'nlme'
> > > * removing 'C:/R_Libs/nlme'
> > > Warning in install.packages :
> > >    installation of package ‘nlme’ had non-zero exit status
> > > ERROR: dependency 'lattice' is not available for package 'Matrix'
> > > * removing 'C:/R_Libs/Matrix'
> > > Warning in install.packages :
> > >    installation of package ‘Matrix’ had non-zero exit status
> > > * installing *source* package 'cluster' ...
> > > ** package 'cluster' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** libs
> > > Warning in system(cmd) : 'make' not found
> > > ERROR: compilation failed for package 'cluster'
> > > * removing 'C:/R_Libs/cluster'
> > > Warning in install.packages :
> > >    installation of package ‘cluster’ had non-zero exit status
> > > ERROR: dependency 'lattice' is not available for package 'hexbin'
> > > * removing 'C:/R_Libs/hexbin'
> > > Warning in install.packages :
> > >    installation of package ‘hexbin’ had non-zero exit status
> > > * installing *source* package 'lifecycle' ...
> > > ** package 'lifecycle' successfully unpacked and MD5 sums checked
> > > ** using staged installation
> > > ** R
> > > ** inst
> > > ** byte-compile and prepare package for lazy loading
> > > Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck =
> > vI[[i]]) :
> > >    namespace 'rlang' 0.3.4 is being loaded, but >= 1.1.0 is required
> > > Calls: <Anonymous> ... withCallingHandlers -> loadNamespace ->
> > > namespaceImport -> loadNamespace
> > > Execution halted
> > > ERROR: lazy loading failed for package 'lifecycle'
> > > * removing 'C:/R_Libs/lifecycle'
> > > Warning in install.packages :
> > >    installation of package ‘lifecycle’ had non-zero exit status
> > > ERROR: dependencies 'deldir', 'RcppEigen' are not available for package
> > 'interp'
> > > * removing 'C:/R_Libs/interp'
> > > Warning in install.packages :
> > >    installation of package ‘interp’ had non-zero exit status
> > > ERROR: dependency 'timechange' is not available for package 'lubridate'
> > > * removing 'C:/R_Libs/lubridate'
> > > Warning in install.packages :
> > >    installation of package ‘lubridate’ had non-zero exit status
> > > ERROR: dependency 'maps' is not available for package 'mapproj'
> > > * removing 'C:/R_Libs/mapproj'
> > > Warning in install.packages :
> > >    installation of package ‘mapproj’ had non-zero exit status
> > > ERROR: dependencies 'nlme', 'Matrix' are not available for package
> 'mgcv'
> > > * removing 'C:/R_Libs/mgcv'
> > > Warning in install.packages :
> > >    installation of package ‘mgcv’ had non-zero exit status
> > > ERROR: dependency 'lifecycle' is not available for package 'vctrs'
> > > * removing 'C:/R_Libs/vctrs'
> > > Warning in install.packages :
> > >    installation of package ‘vctrs’ had non-zero exit status
> > > ERROR: dependencies 'lattice', 'png', 'jpeg', 'interp', 'MASS' are not
> > > available for package 'latticeExtra'
> > > * removing 'C:/R_Libs/latticeExtra'
> > > Warning in install.packages :
> > >    installation of package ‘latticeExtra’ had non-zero exit status
> > > ERROR: dependencies 'lifecycle', 'vctrs' are not available for package
> > 'pillar'
> > > * removing 'C:/R_Libs/pillar'
> > > Warning in install.packages :
> > >    installation of package ‘pillar’ had non-zero exit status
> > > ERROR: dependencies 'lifecycle', 'vctrs' are not available for package
> > > 'tidyselect'
> > > * removing 'C:/R_Libs/tidyselect'
> > > Warning in install.packages :
> > >    installation of package ‘tidyselect’ had non-zero exit status
> > > ERROR: dependencies 'lifecycle', 'vctrs' are not available for package
> > 'purrr'
> > > * removing 'C:/R_Libs/purrr'
> > > Warning in install.packages :
> > >    installation of package ‘purrr’ had non-zero exit status
> > > ERROR: dependencies 'lifecycle', 'pillar', 'vctrs' are not available
> > > for package 'tibble'
> > > * removing 'C:/R_Libs/tibble'
> > > Warning in install.packages :
> > >    installation of package ‘tibble’ had non-zero exit status
> > > ERROR: dependencies 'lifecycle', 'pillar', 'vctrs' are not available
> > > for package 'dplyr'
> > > * removing 'C:/R_Libs/dplyr'
> > > Warning in install.packages :
> > >    installation of package ‘dplyr’ had non-zero exit status
> > > ERROR: dependencies 'cluster', 'hexbin', 'lattice', 'latticeExtra',
> > > 'lubridate', 'mapproj', 'MASS', 'mgcv' are not available for package
> > > 'openair'
> > > * removing 'C:/R_Libs/openair'
> > > Warning in install.packages :
> > >    installation of package ‘openair’ had non-zero exit status
> > >
> > >
> > >
> > Hello,
> >
> > If you are on Windows, do you have rtools [1] installed?
> > Also, please address your question to R-Help [2], [3], not to me
> directly.
> >
> >
> > [1] https://cran.r-project.org/bin/windows/Rtools/
> > [2] r-help using r-project.org
> > [3] https://stat.ethz.ch/mailman/listinfo/r-help
> >
> > Hope this helps,
> >
> > Rui Barradas
> >
> >
> > --
> > Este e-mail foi analisado pelo software antivírus AVG para verificar a
> > presença de vírus.
> > www.avg.com
> >
>
>
> --
> Best Regards
> Javad Bayat
> M.Sc. Environment Engineering
> Alternative Mail: bayat194 using yahoo.com
>
>         [[alternative HTML version deleted]]
>
> ______________________________________________
> R-help using r-project.org mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide
> http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.
>

	[[alternative HTML version deleted]]



More information about the R-help mailing list