[R] Problem when trying to install packages

peter dalgaard pd@|gd @end|ng |rom gm@||@com
Mon Mar 18 15:16:46 CET 2024


2 things:

1) utils::install.packages(....) sometimes helps if the Rstudio version got wedged somehow.

2) You seem to be missing several Recommended packages (lattice, MASS, Matrix, nlme, cluster,....). Did you install R without those?


-pd

> On 16 Mar 2024, at 05:09 , javad bayat <j.bayat194 using gmail.com> wrote:
> 
> Dear Rui;
> Many thanks for your reply. I have installed Rtools (rtools43-5958-5975) on
> my PC and I have R version 4.3.3 and 4.3.2 to install. Also I have
> installed Rstudio through Anaconda Navigator.
> But I do not know how to use Rtools for installing the R packages. I would
> be more than happy if you help me.
> Sincerely yours
> 
> 
> 
>> Dear Rui;
>> I hope this email finds you well. I have a problem installing packages in
>> Rstudio and R software. When I try to install a package, the software
> tries
>> to download but after downloading, it gives some errors and does not work.
>> I would be more than happy if you please help me to solve this issue.
>> Warm regards.
>> 
>> 
>>> install.packages("openair", type = "source")Installing package into
> ‘C:/R_Libs’
>> (as ‘lib’ is unspecified)Warning in install.packages :
>>   dependencies ‘lattice’, ‘MASS’ are not availablealso installing the
>> dependencies ‘deldir’, ‘RcppEigen’, ‘cli’, ‘glue’, ‘lifecycle’,
>> ‘pillar’, ‘rlang’, ‘tibble’, ‘tidyselect’, ‘vctrs’, ‘png’, ‘jpeg’,
>> ‘interp’, ‘timechange’, ‘maps’, ‘nlme’, ‘Matrix’, ‘cluster’, ‘dplyr’,
>> ‘hexbin’, ‘latticeExtra’, ‘lubridate’, ‘mapproj’, ‘mgcv’, ‘purrr’
>> trying URL '
> https://cran.rstudio.com/src/contrib/deldir_2.0-4.tar.gz'Content
>> type 'application/x-gzip' length 103621 bytes (101 KB)downloaded 101
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/RcppEigen_0.3.4.0.0.tar.gz'Content
>> type 'application/x-gzip' length 1765714 bytes (1.7 MB)downloaded 1.7
>> MB
>> trying URL 'https://cran.rstudio.com/src/contrib/cli_3.6.2.tar.gz'Content
>> type 'application/x-gzip' length 569771 bytes (556 KB)downloaded 556
>> KB
>> trying URL 'https://cran.rstudio.com/src/contrib/glue_1.7.0.tar.gz'Content
>> type 'application/x-gzip' length 105420 bytes (102 KB)downloaded 102
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/lifecycle_1.0.4.tar.gz'Content
>> type 'application/x-gzip' length 107656 bytes (105 KB)downloaded 105
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/pillar_1.9.0.tar.gz'Content
>> type 'application/x-gzip' length 444528 bytes (434 KB)downloaded 434
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/rlang_1.1.3.tar.gz'Content
>> type 'application/x-gzip' length 763765 bytes (745 KB)downloaded 745
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/tibble_3.2.1.tar.gz'Content
>> type 'application/x-gzip' length 565982 bytes (552 KB)downloaded 552
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/tidyselect_1.2.1.tar.gz'Content
>> type 'application/x-gzip' length 103591 bytes (101 KB)downloaded 101
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/vctrs_0.6.5.tar.gz'Content
>> type 'application/x-gzip' length 969066 bytes (946 KB)downloaded 946
>> KB
>> trying URL 'https://cran.rstudio.com/src/contrib/png_0.1-8.tar.gz'Content
>> type 'application/x-gzip' length 24880 bytes (24 KB)downloaded 24 KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/jpeg_0.1-10.tar.gz'Content
>> type 'application/x-gzip' length 18667 bytes (18 KB)downloaded 18 KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/interp_1.1-6.tar.gz'Content
>> type 'application/x-gzip' length 1112116 bytes (1.1 MB)downloaded 1.1
>> MB
>> trying URL '
> https://cran.rstudio.com/src/contrib/timechange_0.3.0.tar.gz'Content
>> type 'application/x-gzip' length 103439 bytes (101 KB)downloaded 101
>> KB
>> trying URL 'https://cran.rstudio.com/src/contrib/maps_3.4.2.tar.gz'Content
>> type 'application/x-gzip' length 2278051 bytes (2.2 MB)downloaded 2.2
>> MB
>> trying URL '
> https://cran.rstudio.com/src/contrib/nlme_3.1-164.tar.gz'Content
>> type 'application/x-gzip' length 836832 bytes (817 KB)downloaded 817
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/Matrix_1.6-5.tar.gz'Content
>> type 'application/x-gzip' length 2883851 bytes (2.8 MB)downloaded 2.8
>> MB
>> trying URL '
> https://cran.rstudio.com/src/contrib/cluster_2.1.6.tar.gz'Content
>> type 'application/x-gzip' length 369050 bytes (360 KB)downloaded 360
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/dplyr_1.1.4.tar.gz'Content
>> type 'application/x-gzip' length 1207521 bytes (1.2 MB)downloaded 1.2
>> MB
>> trying URL '
> https://cran.rstudio.com/src/contrib/hexbin_1.28.3.tar.gz'Content
>> type 'application/x-gzip' length 1199967 bytes (1.1 MB)downloaded 1.1
>> MB
>> trying URL '
> https://cran.rstudio.com/src/contrib/latticeExtra_0.6-30.tar.gz'Content
>> type 'application/x-gzip' length 1292936 bytes (1.2 MB)downloaded 1.2
>> MB
>> trying URL '
> https://cran.rstudio.com/src/contrib/lubridate_1.9.3.tar.gz'Content
>> type 'application/x-gzip' length 428043 bytes (418 KB)downloaded 418
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/mapproj_1.2.11.tar.gz'Content
>> type 'application/x-gzip' length 25544 bytes (24 KB)downloaded 24 KB
>> trying URL 'https://cran.rstudio.com/src/contrib/mgcv_1.9-1.tar.gz'Content
>> type 'application/x-gzip' length 1083217 bytes (1.0 MB)downloaded 1.0
>> MB
>> trying URL '
> https://cran.rstudio.com/src/contrib/purrr_1.0.2.tar.gz'Content
>> type 'application/x-gzip' length 220868 bytes (215 KB)downloaded 215
>> KB
>> trying URL '
> https://cran.rstudio.com/src/contrib/openair_2.18-2.tar.gz'Content
>> type 'application/x-gzip' length 1796725 bytes (1.7 MB)downloaded 1.7
> Hello,
> 
> If you are on Windows, do you have rtools [1] installed?
> 
> 
> 
> 
> On Thu, Mar 14, 2024 at 6:47 PM Rui Barradas <ruipbarradas using sapo.pt> wrote:
> 
>> Às 04:12 de 13/03/2024, javad bayat escreveu:
>>> Dear Rui;
>>> I hope this email finds you well. I have a problem installing packages in
>>> Rstudio and R software. When I try to install a package, the software
>> tries
>>> to download but after downloading, it gives some errors and does not
>> work.
>>> I would be more than happy if you please help me to solve this issue.
>>> Warm regards.
>>> 
>>> 
>>>> install.packages("openair", type = "source")Installing package into
>> ‘C:/R_Libs’
>>> (as ‘lib’ is unspecified)Warning in install.packages :
>>>   dependencies ‘lattice’, ‘MASS’ are not availablealso installing the
>>> dependencies ‘deldir’, ‘RcppEigen’, ‘cli’, ‘glue’, ‘lifecycle’,
>>> ‘pillar’, ‘rlang’, ‘tibble’, ‘tidyselect’, ‘vctrs’, ‘png’, ‘jpeg’,
>>> ‘interp’, ‘timechange’, ‘maps’, ‘nlme’, ‘Matrix’, ‘cluster’, ‘dplyr’,
>>> ‘hexbin’, ‘latticeExtra’, ‘lubridate’, ‘mapproj’, ‘mgcv’, ‘purrr’
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/deldir_2.0-4.tar.gz'Content
>>> type 'application/x-gzip' length 103621 bytes (101 KB)downloaded 101
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/RcppEigen_0.3.4.0.0.tar.gz'Content
>>> type 'application/x-gzip' length 1765714 bytes (1.7 MB)downloaded 1.7
>>> MB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/cli_3.6.2.tar.gz'Content
>>> type 'application/x-gzip' length 569771 bytes (556 KB)downloaded 556
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/glue_1.7.0.tar.gz'Content
>>> type 'application/x-gzip' length 105420 bytes (102 KB)downloaded 102
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/lifecycle_1.0.4.tar.gz'Content
>>> type 'application/x-gzip' length 107656 bytes (105 KB)downloaded 105
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/pillar_1.9.0.tar.gz'Content
>>> type 'application/x-gzip' length 444528 bytes (434 KB)downloaded 434
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/rlang_1.1.3.tar.gz'Content
>>> type 'application/x-gzip' length 763765 bytes (745 KB)downloaded 745
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/tibble_3.2.1.tar.gz'Content
>>> type 'application/x-gzip' length 565982 bytes (552 KB)downloaded 552
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/tidyselect_1.2.1.tar.gz'Content
>>> type 'application/x-gzip' length 103591 bytes (101 KB)downloaded 101
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/vctrs_0.6.5.tar.gz'Content
>>> type 'application/x-gzip' length 969066 bytes (946 KB)downloaded 946
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/png_0.1-8.tar.gz'Content
>>> type 'application/x-gzip' length 24880 bytes (24 KB)downloaded 24 KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/jpeg_0.1-10.tar.gz'Content
>>> type 'application/x-gzip' length 18667 bytes (18 KB)downloaded 18 KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/interp_1.1-6.tar.gz'Content
>>> type 'application/x-gzip' length 1112116 bytes (1.1 MB)downloaded 1.1
>>> MB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/timechange_0.3.0.tar.gz'Content
>>> type 'application/x-gzip' length 103439 bytes (101 KB)downloaded 101
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/maps_3.4.2.tar.gz'Content
>>> type 'application/x-gzip' length 2278051 bytes (2.2 MB)downloaded 2.2
>>> MB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/nlme_3.1-164.tar.gz'Content
>>> type 'application/x-gzip' length 836832 bytes (817 KB)downloaded 817
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/Matrix_1.6-5.tar.gz'Content
>>> type 'application/x-gzip' length 2883851 bytes (2.8 MB)downloaded 2.8
>>> MB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/cluster_2.1.6.tar.gz'Content
>>> type 'application/x-gzip' length 369050 bytes (360 KB)downloaded 360
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/dplyr_1.1.4.tar.gz'Content
>>> type 'application/x-gzip' length 1207521 bytes (1.2 MB)downloaded 1.2
>>> MB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/hexbin_1.28.3.tar.gz'Content
>>> type 'application/x-gzip' length 1199967 bytes (1.1 MB)downloaded 1.1
>>> MB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/latticeExtra_0.6-30.tar.gz'Content
>>> type 'application/x-gzip' length 1292936 bytes (1.2 MB)downloaded 1.2
>>> MB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/lubridate_1.9.3.tar.gz'Content
>>> type 'application/x-gzip' length 428043 bytes (418 KB)downloaded 418
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/mapproj_1.2.11.tar.gz'Content
>>> type 'application/x-gzip' length 25544 bytes (24 KB)downloaded 24 KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/mgcv_1.9-1.tar.gz'Content
>>> type 'application/x-gzip' length 1083217 bytes (1.0 MB)downloaded 1.0
>>> MB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/purrr_1.0.2.tar.gz'Content
>>> type 'application/x-gzip' length 220868 bytes (215 KB)downloaded 215
>>> KB
>>> trying URL '
>> https://cran.rstudio.com/src/contrib/openair_2.18-2.tar.gz'Content
>>> type 'application/x-gzip' length 1796725 bytes (1.7 MB)downloaded 1.7
>>> MB
>>> * installing *source* package 'deldir' ...
>>> ** package 'deldir' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> ** libs
>>> Warning in system(cmd) : 'make' not found
>>> ERROR: compilation failed for package 'deldir'
>>> * removing 'C:/R_Libs/deldir'
>>> Warning in install.packages :
>>>   installation of package ‘deldir’ had non-zero exit status
>>> * installing *source* package 'RcppEigen' ...
>>> ** package 'RcppEigen' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> ** libs
>>> Warning in system(cmd) : 'make' not found
>>> ERROR: compilation failed for package 'RcppEigen'
>>> * removing 'C:/R_Libs/RcppEigen'
>>> Warning in install.packages :
>>>   installation of package ‘RcppEigen’ had non-zero exit status
>>> * installing *source* package 'cli' ...
>>> ** package 'cli' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> ** libs
>>> Warning in system(cmd) : 'make' not found
>>> ERROR: compilation failed for package 'cli'
>>> * removing 'C:/R_Libs/cli'
>>> Warning in install.packages :
>>>   installation of package ‘cli’ had non-zero exit status
>>> * installing *source* package 'glue' ...
>>> ** package 'glue' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> ** libs
>>> Warning in system(cmd) : 'make' not found
>>> ERROR: compilation failed for package 'glue'
>>> * removing 'C:/R_Libs/glue'
>>> Warning in install.packages :
>>>   installation of package ‘glue’ had non-zero exit status
>>> * installing *source* package 'rlang' ...
>>> ** package 'rlang' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> ** libs
>>> Warning in system(cmd) : 'make' not found
>>> ERROR: compilation failed for package 'rlang'
>>> * removing 'C:/R_Libs/rlang'
>>> Warning in install.packages :
>>>   installation of package ‘rlang’ had non-zero exit status
>>> * installing *source* package 'png' ...
>>> ** package 'png' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> bash.exe: warning: could not find /tmp, please create!
>>>   checking PNG headers and libraries
>>> bash.exe: warning: could not find /tmp, please create!
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 179:
>>> make: command not found
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 180:
>>> make: command not found
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 181:
>>> make: command not found
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 182:
>>> make: command not found
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 183:
>>> make: command not found
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 319:
>>> make: command not found
>>> ./configure.win: line 17: make: command not found
>>> /lib/libpng.lib
>>>   found libpng in LOCAL_SOFT: /lib
>>>   seems ok, ready to go
>>> ** libs
>>> Warning in system(cmd) : 'make' not found
>>> ERROR: compilation failed for package 'png'
>>> * removing 'C:/R_Libs/png'
>>> Warning in install.packages :
>>>   installation of package ‘png’ had non-zero exit status
>>> * installing *source* package 'jpeg' ...
>>> ** package 'jpeg' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> bash.exe: warning: could not find /tmp, please create!
>>>   checking JPEG headers and libraries
>>> bash.exe: warning: could not find /tmp, please create!
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 179:
>>> make: command not found
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 180:
>>> make: command not found
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 181:
>>> make: command not found
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 182:
>>> make: command not found
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 183:
>>> make: command not found
>>> C:\Users\admin\ANACON~1\envs\rstudio\lib\R/bin/config.sh: line 319:
>>> make: command not found
>>> ./configure.win: line 17: make: command not found
>>> /lib/libjpeg.lib
>>>   found libjpeg in LOCAL_SOFT: /lib
>>>   seems ok, ready to go
>>> ** libs
>>> Warning in system(cmd) : 'make' not found
>>> ERROR: compilation failed for package 'jpeg'
>>> * removing 'C:/R_Libs/jpeg'
>>> Warning in install.packages :
>>>   installation of package ‘jpeg’ had non-zero exit status
>>> * installing *source* package 'timechange' ...
>>> ** package 'timechange' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> ** libs
>>> Warning in system(cmd) : 'make' not found
>>> ERROR: compilation failed for package 'timechange'
>>> * removing 'C:/R_Libs/timechange'
>>> Warning in install.packages :
>>>   installation of package ‘timechange’ had non-zero exit status
>>> * installing *source* package 'maps' ...
>>> ** package 'maps' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> 
>>>    **********************************************
>>>    WARNING: this package has a configure script
>>>          It probably needs manual configuration
>>>    **********************************************
>>> 
>>> 
>>> ** libs
>>>   running 'src/Makefile.win' ...
>>> Warning in system(paste("make --no-print-directory", paste("-f",
>>> shQuote(makefiles),  :
>>>   'make' not found
>>> ERROR: compilation failed for package 'maps'
>>> * removing 'C:/R_Libs/maps'
>>> Warning in install.packages :
>>>   installation of package ‘maps’ had non-zero exit status
>>> ERROR: dependency 'lattice' is not available for package 'nlme'
>>> * removing 'C:/R_Libs/nlme'
>>> Warning in install.packages :
>>>   installation of package ‘nlme’ had non-zero exit status
>>> ERROR: dependency 'lattice' is not available for package 'Matrix'
>>> * removing 'C:/R_Libs/Matrix'
>>> Warning in install.packages :
>>>   installation of package ‘Matrix’ had non-zero exit status
>>> * installing *source* package 'cluster' ...
>>> ** package 'cluster' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> ** libs
>>> Warning in system(cmd) : 'make' not found
>>> ERROR: compilation failed for package 'cluster'
>>> * removing 'C:/R_Libs/cluster'
>>> Warning in install.packages :
>>>   installation of package ‘cluster’ had non-zero exit status
>>> ERROR: dependency 'lattice' is not available for package 'hexbin'
>>> * removing 'C:/R_Libs/hexbin'
>>> Warning in install.packages :
>>>   installation of package ‘hexbin’ had non-zero exit status
>>> * installing *source* package 'lifecycle' ...
>>> ** package 'lifecycle' successfully unpacked and MD5 sums checked
>>> ** using staged installation
>>> ** R
>>> ** inst
>>> ** byte-compile and prepare package for lazy loading
>>> Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck =
>> vI[[i]]) :
>>>   namespace 'rlang' 0.3.4 is being loaded, but >= 1.1.0 is required
>>> Calls: <Anonymous> ... withCallingHandlers -> loadNamespace ->
>>> namespaceImport -> loadNamespace
>>> Execution halted
>>> ERROR: lazy loading failed for package 'lifecycle'
>>> * removing 'C:/R_Libs/lifecycle'
>>> Warning in install.packages :
>>>   installation of package ‘lifecycle’ had non-zero exit status
>>> ERROR: dependencies 'deldir', 'RcppEigen' are not available for package
>> 'interp'
>>> * removing 'C:/R_Libs/interp'
>>> Warning in install.packages :
>>>   installation of package ‘interp’ had non-zero exit status
>>> ERROR: dependency 'timechange' is not available for package 'lubridate'
>>> * removing 'C:/R_Libs/lubridate'
>>> Warning in install.packages :
>>>   installation of package ‘lubridate’ had non-zero exit status
>>> ERROR: dependency 'maps' is not available for package 'mapproj'
>>> * removing 'C:/R_Libs/mapproj'
>>> Warning in install.packages :
>>>   installation of package ‘mapproj’ had non-zero exit status
>>> ERROR: dependencies 'nlme', 'Matrix' are not available for package 'mgcv'
>>> * removing 'C:/R_Libs/mgcv'
>>> Warning in install.packages :
>>>   installation of package ‘mgcv’ had non-zero exit status
>>> ERROR: dependency 'lifecycle' is not available for package 'vctrs'
>>> * removing 'C:/R_Libs/vctrs'
>>> Warning in install.packages :
>>>   installation of package ‘vctrs’ had non-zero exit status
>>> ERROR: dependencies 'lattice', 'png', 'jpeg', 'interp', 'MASS' are not
>>> available for package 'latticeExtra'
>>> * removing 'C:/R_Libs/latticeExtra'
>>> Warning in install.packages :
>>>   installation of package ‘latticeExtra’ had non-zero exit status
>>> ERROR: dependencies 'lifecycle', 'vctrs' are not available for package
>> 'pillar'
>>> * removing 'C:/R_Libs/pillar'
>>> Warning in install.packages :
>>>   installation of package ‘pillar’ had non-zero exit status
>>> ERROR: dependencies 'lifecycle', 'vctrs' are not available for package
>>> 'tidyselect'
>>> * removing 'C:/R_Libs/tidyselect'
>>> Warning in install.packages :
>>>   installation of package ‘tidyselect’ had non-zero exit status
>>> ERROR: dependencies 'lifecycle', 'vctrs' are not available for package
>> 'purrr'
>>> * removing 'C:/R_Libs/purrr'
>>> Warning in install.packages :
>>>   installation of package ‘purrr’ had non-zero exit status
>>> ERROR: dependencies 'lifecycle', 'pillar', 'vctrs' are not available
>>> for package 'tibble'
>>> * removing 'C:/R_Libs/tibble'
>>> Warning in install.packages :
>>>   installation of package ‘tibble’ had non-zero exit status
>>> ERROR: dependencies 'lifecycle', 'pillar', 'vctrs' are not available
>>> for package 'dplyr'
>>> * removing 'C:/R_Libs/dplyr'
>>> Warning in install.packages :
>>>   installation of package ‘dplyr’ had non-zero exit status
>>> ERROR: dependencies 'cluster', 'hexbin', 'lattice', 'latticeExtra',
>>> 'lubridate', 'mapproj', 'MASS', 'mgcv' are not available for package
>>> 'openair'
>>> * removing 'C:/R_Libs/openair'
>>> Warning in install.packages :
>>>   installation of package ‘openair’ had non-zero exit status
>>> 
>>> 
>>> 
>> Hello,
>> 
>> If you are on Windows, do you have rtools [1] installed?
>> Also, please address your question to R-Help [2], [3], not to me directly.
>> 
>> 
>> [1] https://cran.r-project.org/bin/windows/Rtools/
>> [2] r-help using r-project.org
>> [3] https://stat.ethz.ch/mailman/listinfo/r-help
>> 
>> Hope this helps,
>> 
>> Rui Barradas
>> 
>> 
>> --
>> Este e-mail foi analisado pelo software antivírus AVG para verificar a
>> presença de vírus.
>> www.avg.com
>> 
> 
> 
> -- 
> Best Regards
> Javad Bayat
> M.Sc. Environment Engineering
> Alternative Mail: bayat194 using yahoo.com
> 
> 	[[alternative HTML version deleted]]
> 
> ______________________________________________
> R-help using r-project.org mailing list -- To UNSUBSCRIBE and more, see
> https://stat.ethz.ch/mailman/listinfo/r-help
> PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
> and provide commented, minimal, self-contained, reproducible code.

-- 
Peter Dalgaard, Professor,
Center for Statistics, Copenhagen Business School
Solbjerg Plads 3, 2000 Frederiksberg, Denmark
Phone: (+45)38153501
Office: A 4.23
Email: pd.mes using cbs.dk  Priv: PDalgd using gmail.com



More information about the R-help mailing list