[Rd] Mismatch between the Rconsole file and the RGui Configuration editor

Paulo Barata pb @end|ng |rom |n|o||nk@com@br
Wed Aug 31 18:08:02 CEST 2022


Dear Tomas,

I am sorry, my fault. I see now that you said R-devel 82776, not R 
patched 82776.

Yes, the problem is fixed in R-devel 82776 --- this is R Under 
development (unstable) (2022-08-30 r82776 ucrt). There is no more the 
mismatch between the Rconsole file and the GUI editor. It is all right now.

My apologies again. Thank you for your attention.

Best regards,

Paulo

----------------------------------------------------------

On 31/08/2022 12:58, Paulo Barata wrote:
> Dear Tomas,
> 
> Thank you for your attention and for the detailed explanation about the 
> issue with the R Gui.
> 
> As you have indicated, I tested R version 4.2.1 Patched (2022-08-30 
> r82776 ucrt), which I downloaded today. Unfortunately, the mismatch 
> between the Rconsole file and the GUI preferences continues to happen 
> here on my computer.
> 
> Even if I delete the Rconsole file from the Documents folder in Windows 
> and save a new Rconsole file, there is that mismatch.
> 
> It seems that the GUI editor (and the actual size of the R worspace) is 
> always a bit smaller that what is recorded in the Rconsole file, that 
> is, a bit smaller than what I specified for rows and columns. For 
> instance, if I specified 37 rows and 112 columns, this is what is 
> recorded in the Rconsole file, but when I open R and go to the Gui 
> editor, I find 36 rows and 110 columns, and the workspace is clearly 
> different from my specifications.
> 
> I use Windows 10 Pro for Workstations, version 21H2, installed on 
> 23/‎August/‎2022, build 19044.1889 (this is the latest update for 
> Windows 10).
> 
> As I said before, of course the mismatch does not prevent me of using R, 
> this could be said to be just a nuisance. But I think that no mismatch 
> should be happening.
> 
> Thank you once again.
> 
> Best regards,
> 
> Paulo
> 
> ----------------------------------------------------------
> 
> On 30/08/2022 13:33, Tomas Kalibera wrote:
>>
>> On 8/27/22 20:46, Paulo Barata wrote:
>>>
>>> To the R developers,
>>>
>>> In R version 4.2.1 (2022-06-23 ucrt), and also in R version 4.2.1 
>>> Patched (2022-08-24 r82762 ucrt), something strange is happening with 
>>> the GUI Preferences x Rconsole file. I open the GUI Preferences (RGui 
>>> Configuration editor), and I define the number of console rows and 
>>> columns, the I click Apply and then I Save the Preferences to the 
>>> Rconsole file (which is in the Documents folders of my Windows 10 
>>> Pro) -- I overwrite the existing Rconsole file. Then I close R.
>>>
>>> When I open R again, there is always a mismatch between the number of 
>>> console rows and columns correctly recorded in the Rconsole file and 
>>> the numbers actually shown in the RGui Configuration editor.
>>
>> Dear Paulo,
>>
>> thanks for the report. It is now fixed in R-devel 82776 (it would be 
>> nice if you could confirm the problem is fixed for you on your system).
>>
>> You have run into an old bug in GraphApp, a library used by Rgui. The 
>> part saving and restoring the preferences works fine, but the problem 
>> occurs on R startup when creating a new console window. Rgui computes 
>> the client size of the window based on the preferred number of rows 
>> and columns and asks GraphApp to create such window. GraphApp uses its 
>> internal code (probably it pre-dates AdjustWindowRect) to compute the 
>> screen size of the window, so including the title bar, scroll bars, 
>> etc, and then asks Windows to create the window. Rgui then checks the 
>> actual client size of the created window and updates the number of 
>> rows and columns based on that - which is also the number you then see 
>> in the preferences editor. Ideally/normally it should be the same as 
>> what was given initially, e.g. via Rconsole.
>>
>> However, the computation in GraphApp didn't work quite right, it 
>> didn't account for the scrollbars. And the reason was that it assumed 
>> a canvas (CanvasSize bit was set on the window flags). That bit was 
>> set by accident, because GraphApp by accident used the same bit number 
>> for CanvasSize and UseUnicode. The UseUnicode bit is set in Rgui when 
>> running in a multi-byte locale, so for you and many others probably 
>> only since R 4.2. I've changed GraphApp to use a different bit.
>>
>> Thanks for testing Rgui and reporting problems.
>>
>> Best
>> Tomas
>>
>>>
>>> If this list allows attachments, the attached PNG image shows the 
>>> mismatch between the Rconsole file and the RGui Configuration editor, 
>>> just after opening R version 4.2.1 (2022-06-23 ucrt).
>>>
>>> Windows 10 Pro for Workstations
>>> Version 21H2
>>> Installed on 23/‎08/‎2022
>>> OS build 19044.1889
>>> Processor Intel(R) Xeon(R) W-1350 @ 3.30GHz  3.31 GHz
>>> Installed RAM 64.0 GB (63.7 GB usable)
>>>
>>>
>>> R version 4.2.1 (2022-06-23 ucrt) -- "Funny-Looking Kid"
>>> Copyright (C) 2022 The R Foundation for Statistical Computing
>>> Platform: x86_64-w64-mingw32/x64 (64-bit)
>>>
>>>  > Sys.info()
>>>            sysname           release           version nodename
>>>          "Windows"          "10 x64"     "build 19044" "XXXXXXXXXXXXXXX"
>>>            machine             login              user effective_user
>>>           "x86-64"           "XXXXX         "XXXXX" "XXXXX"
>>>  > win.version()
>>> [1] "Windows 10 x64 (build 19044)"
>>>
>>>  > .Platform
>>> $OS.type
>>> [1] "windows"
>>> $file.sep
>>> [1] "/"
>>> $dynlib.ext
>>> [1] ".dll"
>>> $GUI
>>> [1] "Rgui"
>>> $endian
>>> [1] "little"
>>> $pkgType
>>> [1] "win.binary"
>>> $path.sep
>>> [1] ";"
>>> $r_arch
>>> [1] "x64"
>>>
>>> Thank you. Regards,
>>>
>>> Paulo Barata
>>>
>>> (Rio de Janeiro - Brazil)
>>>
>>> ______________________________________________
>>> R-devel using r-project.org mailing list
>>> https://stat.ethz.ch/mailman/listinfo/r-devel
> 
> ______________________________________________
> R-devel using r-project.org mailing list
> https://stat.ethz.ch/mailman/listinfo/r-devel



More information about the R-devel mailing list